From: Igor Grinberg <[email protected]> The soft reset has transitioned to CPUCP packet instead of plain register write and is about to be removed from the struct cpu_dyn_regs. As a preparation for removing the cpu_rst_status field from struct cpu_dyn_regs, switch to use the plain macro - this keeps the backward compatibility.
Signed-off-by: Igor Grinberg <[email protected]> Reviewed-by: Oded Gabbay <[email protected]> Signed-off-by: Oded Gabbay <[email protected]> --- drivers/accel/habanalabs/gaudi2/gaudi2.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/accel/habanalabs/gaudi2/gaudi2.c b/drivers/accel/habanalabs/gaudi2/gaudi2.c index 222310bf1098..dc96e34b72ef 100644 --- a/drivers/accel/habanalabs/gaudi2/gaudi2.c +++ b/drivers/accel/habanalabs/gaudi2/gaudi2.c @@ -6253,16 +6253,12 @@ static int gaudi2_get_soft_rst_done_indication(struct hl_device *hdev, u32 poll_ static int gaudi2_execute_soft_reset(struct hl_device *hdev, bool driver_performs_reset, u32 poll_timeout_us) { - struct cpu_dyn_regs *dyn_regs = &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs; - int rc = 0; + int rc; if (!driver_performs_reset) { if (hl_is_fw_sw_ver_below(hdev, 1, 10)) { /* set SP to indicate reset request sent to FW */ - if (dyn_regs->cpu_rst_status) - WREG32(le32_to_cpu(dyn_regs->cpu_rst_status), CPU_RST_STATUS_NA); - else - WREG32(mmCPU_RST_STATUS_TO_HOST, CPU_RST_STATUS_NA); + WREG32(mmCPU_RST_STATUS_TO_HOST, CPU_RST_STATUS_NA); WREG32(mmGIC_HOST_SOFT_RST_IRQ_POLL_REG, gaudi2_irq_map_table[GAUDI2_EVENT_CPU_SOFT_RESET].cpu_id); -- 2.34.1
