Follow the dp-connector example and add hdmi-pwr supply to drive the 5V pin of the HDMI connector (together with some simple glue logic possibly attached to the connector).
Reviewed-by: Laurent Pinchart <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> --- .../devicetree/bindings/display/connector/hdmi-connector.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml index 83c0d008265b..3ee8f9225984 100644 --- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml @@ -36,6 +36,9 @@ properties: description: GPIO signal to enable DDC bus maxItems: 1 + hdmi-pwr-supply: + description: Power supply for the HDMI +5V Power pin + port: $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing HDMI signals -- 2.39.2
