[AMD Official Use Only - General]

Hello Rodrigo and Harry,
I would like to propose some changes to keep this patch consistent with the 
naming scheme and general organization of the drm_dp.h file.

#define DP_EDP_OLED_VESA_BRIGHTNESS_ON      0x80
It would be better to use the (1<<7) representation for this bit to follow the 
pattern established by the other defines in the file. Also, a more generic name 
for this macro would be DP_EDP_PANEL_LUMINANCE_CONTROL_ENABLE.

# define DP_EDP_OLED_VESA_CAP   (1 << 4)
A more generic name for this macro would be 
DP_EDP_PANEL_LUMINANCE_CONTROL_CAPABLE


In terms of the file structure, DP_EDP_PANEL_LUMINANCE_CONTROL_ENABLE should 
appear underneath the definition of DP_EDP_BACKLIGHT_MODE_SET_REGISTER. 
Similarly, DP_EDP_PANEL_LUMINANCE_CONTROL_CAPABLE should appear underneath the 
definition of DP_EDP_GENERAL_CAP_2

For a complete definition of the millinit based brightness control 
specification the following should also be added:
#define DP_EDP_PANEL_TARGET_LUMINANCE_VALUE     0x734

Here is a suggested pseudo-patch with all these changes:

#define DP_EDP_GENERAL_CAP_2               0x703
 # define DP_EDP_OVERDRIVE_ENGINE_ENABLED               (1 << 0)
+# define DP_EDP_PANEL_LUMINANCE_CONTROL_ENABLE (1<<7)

# define DP_EDP_DYNAMIC_BACKLIGHT_ENABLE               (1 << 4)
 # define DP_EDP_REGIONAL_BACKLIGHT_ENABLE              (1 << 5)
 # define DP_EDP_UPDATE_REGION_BRIGHTNESS               (1 << 6) /* eDP 1.4 */
+# define DP_EDP_PANEL_LUMINANCE_CONTROL_ENABLE (1<<7)

 #define DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET   0x732
 #define DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET   0x733
+#define DP_EDP_PANEL_TARGET_LUMINANCE_VALUE 0x734


Thank you,
Felipe

-----Original Message-----
From: Wentland, Harry <[email protected]>
Sent: Wednesday, March 22, 2023 2:01 PM
To: Siqueira, Rodrigo <[email protected]>; [email protected]; 
[email protected]
Cc: [email protected]; Koo, Anthony <[email protected]>; 
Nagulendran, Iswara <[email protected]>; Clark, Felipe 
<[email protected]>; [email protected]; 
[email protected]
Subject: Re: [PATCH] drm/display: Add missing OLED Vesa brightnesses definitions



On 3/22/23 12:05, Rodrigo Siqueira wrote:
> Cc: Anthony Koo <[email protected]>
> Cc: Iswara Negulendran <[email protected]>
> Cc: Felipe Clark <[email protected]>
> Cc: Harry Wentland <[email protected]>
> Signed-off-by: Rodrigo Siqueira <[email protected]>

Reviewed-by: Harry Wentland <[email protected]>

Harry

> ---
>  include/drm/display/drm_dp.h | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/include/drm/display/drm_dp.h
> b/include/drm/display/drm_dp.h index 632376c291db..d30a9b2f450c 100644
> --- a/include/drm/display/drm_dp.h
> +++ b/include/drm/display/drm_dp.h
> @@ -977,6 +977,8 @@
>  # define DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP           (1 << 5)
>  # define DP_EDP_DYNAMIC_BACKLIGHT_CAP                        (1 << 6)
>  # define DP_EDP_VBLANK_BACKLIGHT_UPDATE_CAP          (1 << 7)
> +#define DP_EDP_OLED_VESA_BRIGHTNESS_ON      0x80
> +# define DP_EDP_OLED_VESA_CAP                                (1 << 4)
>
>  #define DP_EDP_GENERAL_CAP_2             0x703
>  # define DP_EDP_OVERDRIVE_ENGINE_ENABLED             (1 << 0)

Reply via email to