From: Dave Stevenson <[email protected]>
The back porch timings were correct, only the sync offset was wrong.
Correct timing is now reported for 1080i and 576i, but the h offset is
incorrect for 480i for non-obvious reasons.
Fixes: c0ba150ce468 ("drm/vc4: Correct HDMI timing registers for interlaced
modes")
Signed-off-by: Dave Stevenson <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 12a00d644b61..e027381b7331 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1298,11 +1298,12 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi
*vc4_hdmi,
VC4_SET_FIELD(mode->crtc_vdisplay, VC5_HDMI_VERTA_VAL));
u32 vertb = (VC4_SET_FIELD(mode->htotal >> (2 - pixel_rep),
VC5_HDMI_VERTB_VSPO) |
- VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end,
+ VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end +
+ interlaced,
VC4_HDMI_VERTB_VBP));
u32 vertb_even = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) |
VC4_SET_FIELD(mode->crtc_vtotal -
- mode->crtc_vsync_end - interlaced,
+ mode->crtc_vsync_end,
VC4_HDMI_VERTB_VBP));
unsigned long flags;
unsigned char gcp;
--
2.38.1
