On Fri, Nov 11, 2022 at 4:49 PM Jagan Teki <[email protected]> wrote: > > On Fri, Nov 11, 2022 at 6:19 AM Nicolas Boichat <[email protected]> wrote: > > > > On Fri, Nov 11, 2022 at 2:40 AM Jagan Teki <[email protected]> > > wrote: > > > > > > HFP/HBP/HSA/EOT_PACKET modes in Exynos DSI host specifies > > > 0 = Enable and 1 = Disable. > > > > Oh I see, that's confusing... IMHO you might want to change the > > register macro name... (but if that's what the datasheet uses, it > > might not be ideal either). At the _very_ least, I'd add a comment in > > the code so the next person doesn't attempt to "fix" it again... > > 02/14 on the same series doing the name change. > https://lore.kernel.org/all/[email protected]/
Oh thanks I wasn't cc'ed on that one, makes sense. You can add my reviewed tag to this one, as my HSE comment doesn't change this. Reviewed-by: Nicolas Boichat <[email protected]> But please double check HSE. > > > > > BTW, are you sure DSIM_HSE_MODE is correct now? > > Yes, we have tested in imx8m platforms as well. Sébastien Szymanski > initially observed this issue on the imx8m platform. I'll repeat, are you sure about HSE specifically? You invert the polarity for HBP, HFP, and HSA, which makes sense given your patch 02/14. I'm concerned about HSE. Is the bit really a disable bit? MIPI_DSI_MODE_VIDEO_HSE is supposed to be an enable flag, so you should not do `reg |= DSIM_HSE_DISABLE;`, probably. Thanks, > > Jagan.
