The bridge device can now also be enabled/disabled by an external reset controller. So the device now supports either enable/disable by simple GPIO or by an Reset-Controller.
Signed-off-by: Marco Felsch <[email protected]> --- .../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml index 7306b9874dc3..eff8360c184e 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -35,6 +35,12 @@ properties: vcc-supply: description: A 1.8V power supply (see regulator/regulator.yaml). + resets: + maxItems: 1 + description: | + Reset specifier for bridge_en pin. This is required only if the brdige_en + pin is connected to a reset controller. + ports: $ref: /schemas/graph.yaml#/properties/ports -- 2.30.2
