Gentle ping on this path, thanks.
> -----Original Message-----
> From: Neal Liu <[email protected]>
> Sent: Monday, May 23, 2022 11:02 AM
> To: Greg Kroah-Hartman <[email protected]>; Rob Herring
> <[email protected]>; Krzysztof Kozlowski
> <[email protected]>; Joel Stanley <[email protected]>; Andrew
> Jeffery <[email protected]>; Felipe Balbi <[email protected]>; Sumit Semwal
> <[email protected]>; Christian König <[email protected]>;
> Geert Uytterhoeven <[email protected]>; Li Yang <[email protected]>
> Cc: Neal Liu <[email protected]>; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]
> Subject: [PATCH v5 2/3] ARM: dts: aspeed: Add USB2.0 device controller node
>
> Add USB2.0 device controller(udc) node to device tree for AST2600.
>
> Signed-off-by: Neal Liu <[email protected]>
> ---
> arch/arm/boot/dts/aspeed-g6.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi
> b/arch/arm/boot/dts/aspeed-g6.dtsi
> index 3d5ce9da42c3..822f4fd854f5 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -298,6 +298,16 @@ vhub: usb-vhub@1e6a0000 {
> status = "disabled";
> };
>
> + udc: usb@1e6a2000 {
> + compatible = "aspeed,ast2600-udc";
> + reg = <0x1e6a2000 0x300>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb2bd_default>;
> + status = "disabled";
> + };
> +
> apb {
> compatible = "simple-bus";
> #address-cells = <1>;
> --
> 2.25.1
