On Sun, May 8, 2022 at 1:36 PM Piotr Oniszczuk
<[email protected]> wrote:
>
>
>
> > Wiadomość napisana przez Peter Geis <[email protected]> w dniu
> > 08.05.2022, o godz. 18:53:
> >
> >>
> >> I was trying to do this in dts https://pastebin.com/67wu9QrH but cec is
> >> still non-functional
> >>
> >> Maybe You have some hints/pointers here?
> >
> > Add the following to the HDMI node:
> > assigned-clocks = <&cru CLK_HDMI_CEC>;
> > assigned-clock-rates = <32768>;
>
> I think i have this already (pls see L231/L232 in
> https://pastebin.com/67wu9QrH )
I see you have hdmitxm1_cec as the enabled pin. Are you certain it's
the m1 pin and not the m0 pin?
>
> >
> >>
> >> br
> >>
> >> btw: my dts gives me working usb2 port0/port1 and usb3 port0. but usb3
> >> port1 is non-working
> >> maybe you know what is missing?
> >
> > You're missing &usb2phy0_otg.
>
> Maybe i miss something but adding:
>
> &usb2phy0_otg {
> phy-supply = <&vcc5v0_usb_host>;
> status = "okay";
> };
>
> breaks working usb3 port0
> (so none of usb3 ports are working)
Please pass along a full dmesg in this configuration.
>
>
