On 2022-02-04 13:17:19, Abhinav Kumar wrote:
> Make changes to dpu_encoder to support virtual encoder needed
> to support writeback for dpu.
>
> Signed-off-by: Abhinav Kumar <[email protected]>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 57
> +++++++++++++++++++++--------
> 1 file changed, 42 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index e977c05..947069b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -974,6 +974,7 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder
> *drm_enc,
> struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC];
> struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
> struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL };
> + enum dpu_hw_blk_type blk_type;
> int num_lm, num_ctl, num_pp;
> int i, j;
>
> @@ -1061,20 +1062,36 @@ static void dpu_encoder_virt_mode_set(struct
> drm_encoder *drm_enc,
> phys->hw_pp = dpu_enc->hw_pp[i];
> phys->hw_ctl = to_dpu_hw_ctl(hw_ctl[i]);
>
> + if (phys->intf_mode == INTF_MODE_WB_LINE)
> + blk_type = DPU_HW_BLK_WB;
> + else
> + blk_type = DPU_HW_BLK_INTF;
> +
> num_blk = dpu_rm_get_assigned_resources(&dpu_kms->rm,
> - global_state, drm_enc->base.id, DPU_HW_BLK_INTF,
> + global_state, drm_enc->base.id, blk_type,
> hw_blk, ARRAY_SIZE(hw_blk));
> - for (j = 0; j < num_blk; j++) {
> - struct dpu_hw_intf *hw_intf;
>
> - hw_intf = to_dpu_hw_intf(hw_blk[i]);
> - if (hw_intf->idx == phys->intf_idx)
> - phys->hw_intf = hw_intf;
> + if (blk_type == DPU_HW_BLK_WB) {
> + for (j = 0; j < num_blk; j++) {
> + struct dpu_hw_wb *hw_wb;
> +
> + hw_wb = to_dpu_hw_wb(hw_blk[i]);
> + if (hw_wb->idx == phys->intf_idx)
> + phys->hw_wb = hw_wb;
> + }
> + } else {
> + for (j = 0; j < num_blk; j++) {
> + struct dpu_hw_intf *hw_intf;
> +
> + hw_intf = to_dpu_hw_intf(hw_blk[i]);
> + if (hw_intf->idx == phys->intf_idx)
> + phys->hw_intf = hw_intf;
> + }
It appears the original bit of code iterates j from 0 to num_blks yet
only uses i as iteration value. All of this code seems reentrant
meaning that executing it more than one times is redundant. You've
adopted this mistake, though I'd argue it should use j in hw_blk[i] as
that follows the number of elements in hw_blk returned by
dpu_rm_get_assigned_resources.
I suggest to address this in a separate patch (I can send that too, feel
free to add my Reported-by otherwise) and rebase this patch on top of
that, substituting i with j here as well. It seems to have been
introduced by b954fa6baaca ("drm/msm/dpu: Refactor rm iterator").
- Marijn
> }
>
> - if (!phys->hw_intf) {
> + if (!phys->hw_intf && !phys->hw_wb) {
> DPU_ERROR_ENC(dpu_enc,
> - "no intf block assigned at idx: %d\n", i);
> + "no intf or WB block assigned at idx:
> %d\n", i);
> return;
> }
>
> @@ -1224,15 +1241,22 @@ static void dpu_encoder_virt_disable(struct
> drm_encoder *drm_enc)
> mutex_unlock(&dpu_enc->enc_lock);
> }
>
> -static enum dpu_intf dpu_encoder_get_intf(struct dpu_mdss_cfg *catalog,
> +static enum dpu_intf dpu_encoder_get_intf_or_wb(struct dpu_mdss_cfg *catalog,
> enum dpu_intf_type type, u32 controller_id)
> {
> int i = 0;
>
> - for (i = 0; i < catalog->intf_count; i++) {
> - if (catalog->intf[i].type == type
> - && catalog->intf[i].controller_id == controller_id) {
> - return catalog->intf[i].id;
> + if (type != INTF_WB) {
> + for (i = 0; i < catalog->intf_count; i++) {
> + if (catalog->intf[i].type == type
> + && catalog->intf[i].controller_id ==
> controller_id) {
> + return catalog->intf[i].id;
> + }
> + }
> + } else {
> + for (i = 0; i < catalog->wb_count; i++) {
> + if (catalog->wb[i].id == controller_id)
> + return catalog->wb[i].id;
> }
> }
>
> @@ -2096,6 +2120,9 @@ static int dpu_encoder_setup_display(struct
> dpu_encoder_virt *dpu_enc,
> case DRM_MODE_ENCODER_TMDS:
> intf_type = INTF_DP;
> break;
> + case DRM_MODE_ENCODER_VIRTUAL:
> + intf_type = INTF_WB;
> + break;
> }
>
> WARN_ON(disp_info->num_of_h_tiles < 1);
> @@ -2128,11 +2155,11 @@ static int dpu_encoder_setup_display(struct
> dpu_encoder_virt *dpu_enc,
> DPU_DEBUG("h_tile_instance %d = %d, split_role %d\n",
> i, controller_id, phys_params.split_role);
>
> - phys_params.intf_idx = dpu_encoder_get_intf(dpu_kms->catalog,
> + phys_params.intf_idx =
> dpu_encoder_get_intf_or_wb(dpu_kms->catalog,
>
> intf_type,
>
> controller_id);
> if (phys_params.intf_idx == INTF_MAX) {
> - DPU_ERROR_ENC(dpu_enc, "could not get intf: type %d, id
> %d\n",
> + DPU_ERROR_ENC(dpu_enc, "could not get intf or wb: type
> %d, id %d\n",
> intf_type, controller_id);
> ret = -EINVAL;
> }
> --
> 2.7.4
>
