Add property to hdmi node to get phandle for hdmiphy node. This is required to check the compatible type of phy in hdmi driver. If phy is compatible to exynos5420, it needs to be treated as a platform device rather than a i2c device.
Signed-off-by: Rahul Sharma <[email protected]> --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 0ec6856..239341d 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -101,7 +101,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - hdmiphy@38 { + hdmiphy: hdmiphy@38 { compatible = "samsung,exynos4210-hdmiphy"; reg = <0x38>; }; @@ -187,6 +187,7 @@ hdmi { hpd-gpio = <&gpx3 7 0>; + phy = <&hdmiphy>; }; codec@11000000 { -- 1.7.10.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
