Add required VDD supplies to HDMI block on SMDK5250. Without them, the HDMI driver won't probe. Because of lack of schematics, use same supplies as on Arndale 5250 board (voltage matches).
Cc: <[email protected]> # v3.15+ Signed-off-by: Krzysztof Kozlowski <[email protected]> --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 65d2474f83eb..21fbbf3d8684 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -118,6 +118,9 @@ &hdmi { status = "okay"; ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; }; &i2c_0 { -- 2.32.0
