The DSI burst mode is more energy efficient than the DSI sync pulse mode, make use of the burst mode since the chip supports it as well. Disable the generation of EoT packet, the chip ignores it, so no point in emitting it. Enable transmission of data in LP mode, otherwise register read via DSI does not work with this chip.
Signed-off-by: Marek Vasut <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Robert Foss <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Thomas Zimmermann <[email protected]> To: [email protected] --- drivers/gpu/drm/bridge/chipone-icn6211.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c index aa58f957651e2..6daf2f8013733 100644 --- a/drivers/gpu/drm/bridge/chipone-icn6211.c +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c @@ -529,7 +529,8 @@ static int chipone_probe(struct mipi_dsi_device *dsi) dsi->lanes = icn->dsi_lanes; dsi->format = MIPI_DSI_FMT_RGB888; - dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET; ret = mipi_dsi_attach(dsi); if (ret < 0) { -- 2.34.1
