On 12/10/2021 09:59, Tomi Valkeinen wrote:
> On 23/09/2021 10:06, Neil Armstrong wrote:
>> From: Benoit Parrot <[email protected]>
>>
>> Split out the hardware overlay specifics from omap_plane.
>> To start, the hw overlays are statically assigned to planes.
>>
>> The goal is to eventually assign hw overlays dynamically to planes
>> during plane->atomic_check() based on requested caps (scaling, YUV,
>> etc). And then perform hw overlay re-assignment if required.
>>
>> Signed-off-by: Benoit Parrot <[email protected]>
>> Signed-off-by: Neil Armstrong <[email protected]>
>> ---
>> drivers/gpu/drm/omapdrm/Makefile | 1 +
>> drivers/gpu/drm/omapdrm/omap_drv.c | 9 ++-
>> drivers/gpu/drm/omapdrm/omap_drv.h | 4 ++
>> drivers/gpu/drm/omapdrm/omap_overlay.c | 87 ++++++++++++++++++++++++++
>> drivers/gpu/drm/omapdrm/omap_overlay.h | 31 +++++++++
>> drivers/gpu/drm/omapdrm/omap_plane.c | 42 ++++++-------
>> 6 files changed, 151 insertions(+), 23 deletions(-)
>> create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.c
>> create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.h
>>
>> diff --git a/drivers/gpu/drm/omapdrm/Makefile
>> b/drivers/gpu/drm/omapdrm/Makefile
>> index 21e8277ff88f..710b4e0abcf0 100644
>> --- a/drivers/gpu/drm/omapdrm/Makefile
>> +++ b/drivers/gpu/drm/omapdrm/Makefile
>> @@ -9,6 +9,7 @@ omapdrm-y := omap_drv.o \
>> omap_debugfs.o \
>> omap_crtc.o \
>> omap_plane.o \
>> + omap_overlay.o \
>> omap_encoder.o \
>> omap_fb.o \
>> omap_gem.o \
>> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
>> b/drivers/gpu/drm/omapdrm/omap_drv.c
>> index f86e20578143..b994014b22e8 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
>> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
>> @@ -583,10 +583,14 @@ static int omapdrm_init(struct omap_drm_private *priv,
>> struct device *dev)
>> omap_gem_init(ddev);
>> + ret = omap_hwoverlays_init(priv);
>> + if (ret)
>> + goto err_gem_deinit;
>> +
>> ret = omap_modeset_init(ddev);
>> if (ret) {
>> dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
>> - goto err_gem_deinit;
>> + goto err_free_overlays;
>> }
>> /* Initialize vblank handling, start with all CRTCs disabled. */
>> @@ -618,6 +622,8 @@ static int omapdrm_init(struct omap_drm_private *priv,
>> struct device *dev)
>> omap_fbdev_fini(ddev);
>> err_cleanup_modeset:
>> omap_modeset_fini(ddev);
>> +err_free_overlays:
>> + omap_hwoverlays_destroy(priv);
>> err_gem_deinit:
>> omap_gem_deinit(ddev);
>> destroy_workqueue(priv->wq);
>> @@ -642,6 +648,7 @@ static void omapdrm_cleanup(struct omap_drm_private
>> *priv)
>> drm_atomic_helper_shutdown(ddev);
>> omap_modeset_fini(ddev);
>> + omap_hwoverlays_destroy(priv);
>> omap_gem_deinit(ddev);
>> destroy_workqueue(priv->wq);
>> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h
>> b/drivers/gpu/drm/omapdrm/omap_drv.h
>> index 591d4c273f02..b4d9c2062723 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
>> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
>> @@ -24,6 +24,7 @@
>> #include "omap_gem.h"
>> #include "omap_irq.h"
>> #include "omap_plane.h"
>> +#include "omap_overlay.h"
>> #define DBG(fmt, ...) DRM_DEBUG_DRIVER(fmt"\n", ##__VA_ARGS__)
>> #define VERB(fmt, ...) if (0) DRM_DEBUG_DRIVER(fmt, ##__VA_ARGS__) /*
>> verbose debug */
>> @@ -57,6 +58,9 @@ struct omap_drm_private {
>> unsigned int num_planes;
>> struct drm_plane *planes[8];
>> + unsigned int num_ovls;
>> + struct omap_hw_overlay *overlays[8];
>> +
>> struct drm_fb_helper *fbdev;
>> struct workqueue_struct *wq;
>> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c
>> b/drivers/gpu/drm/omapdrm/omap_overlay.c
>> new file mode 100644
>> index 000000000000..2b1416d2aad2
>> --- /dev/null
>> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
>> @@ -0,0 +1,87 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + * Author: Benoit Parrot, <[email protected]>
>
> Extra comma there, and similar case below.
Fixed
>
>> + */
>> +
>> +#include <drm/drm_atomic.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_plane_helper.h>
>> +
>> +#include "omap_dmm_tiler.h"
>> +#include "omap_drv.h"
>> +
>> +/*
>> + * overlay funcs
>> + */
>> +static const char * const overlay_id_to_name[] = {
>> + [OMAP_DSS_GFX] = "gfx",
>> + [OMAP_DSS_VIDEO1] = "vid1",
>> + [OMAP_DSS_VIDEO2] = "vid2",
>> + [OMAP_DSS_VIDEO3] = "vid3",
>> +};
>
> I was expecting to see the name array to be removed from omap_plane.c as it's
> moved here, but that's not the case. Why is that? Especially as after this
> series these names make no sense with the planes.
You're right, I'll remove the one from omap_plane.c and where it's used.
>
>> +static void omap_overlay_destroy(struct omap_hw_overlay *overlay)
>> +{
>> + kfree(overlay);
>> +}
>> +
>> +static struct omap_hw_overlay *omap_overlay_init(enum omap_plane_id
>> overlay_id,
>> + enum omap_overlay_caps caps)
>> +{
>> + struct omap_hw_overlay *overlay;
>> +
>> + overlay = kzalloc(sizeof(*overlay), GFP_KERNEL);
>> + if (!overlay)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + overlay->name = overlay_id_to_name[overlay_id];
>> + overlay->overlay_id = overlay_id;
>> + overlay->caps = caps;
>> + /*
>> + * When this is called priv->num_crtcs is not known yet.
>> + * Use a safe mask value to start with, it will get updated to the
>> + * proper value after the first use.
>> + */
>> + overlay->possible_crtcs = 0xff;
>
> This sounds like a hack. Why do we need possible_crtcs anyway? If I'm not
> mistaken, on all DSS versions any overlay can be used on any ctrtc. On the
> DRM plane level we need the possible_crtc as the DRM framework needs that
> (i.e. we just always set all crtcs available for all planes), but why is it
> needed here?
Indeed, in omap_drv.c we have:
plane_crtc_mask = (1 << priv->num_pipes) - 1;
for all planes, so I'll rework this.
>
>> + return overlay;
>> +}
>> +
>> +int omap_hwoverlays_init(struct omap_drm_private *priv)
>> +{
>> + static const enum omap_plane_id hw_plane_ids[] = {
>> + OMAP_DSS_GFX, OMAP_DSS_VIDEO1,
>> + OMAP_DSS_VIDEO2, OMAP_DSS_VIDEO3,
>> + };
>> + u32 num_overlays = dispc_get_num_ovls(priv->dispc);
>> + enum omap_overlay_caps caps;
>> + int i, ret;
>> +
>> + for (i = 0; i < num_overlays; i++) {
>> + struct omap_hw_overlay *overlay;
>> +
>> + caps = dispc_ovl_get_caps(priv->dispc, hw_plane_ids[i]);
>> + overlay = omap_overlay_init(hw_plane_ids[i], caps);
>> + if (IS_ERR(overlay)) {
>> + ret = PTR_ERR(overlay);
>> + dev_err(priv->dev, "failed to construct overlay for %s (%d)\n",
>> + overlay_id_to_name[i], ret);
>> + return ret;
>> + }
>
> I think this leaks memory if omap_overlay_init() fails.
Fixed
>
>> + overlay->idx = priv->num_ovls;
>> + priv->overlays[priv->num_ovls++] = overlay;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void omap_hwoverlays_destroy(struct omap_drm_private *priv)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < priv->num_ovls; i++) {
>> + omap_overlay_destroy(priv->overlays[i]);
>> + priv->overlays[i] = NULL;
>> + }
>> +}
>> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h
>> b/drivers/gpu/drm/omapdrm/omap_overlay.h
>> new file mode 100644
>> index 000000000000..892fecb67adb
>> --- /dev/null
>> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
>> @@ -0,0 +1,31 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + * Author: Benoit Parrot, <[email protected]>
>> + */
>> +
>> +#ifndef __OMAPDRM_OVERLAY_H__
>> +#define __OMAPDRM_OVERLAY_H__
>> +
>> +#include <linux/types.h>
>> +
>> +enum drm_plane_type;
>> +
>> +struct drm_device;
>> +struct drm_mode_object;
>> +struct drm_plane;
>> +
>> +/* Used to associate a HW overlay/plane to a plane */
>> +struct omap_hw_overlay {
>> + int idx;
>
> unsigned int.
>
>> +
>> + const char *name;
>> + enum omap_plane_id overlay_id;
>
> Perhaps just "id" is fine. You don't have "overlay_name" there either, but
> just "name".
Ack
>
> Tomi
Thanks,
Neil
