4k requires two dsi pipes, so don't report MODE_OK when only a single pipe is configured. But rather report MODE_PANEL to signal that requirements of the panel are not being met.
Reported-by: Peter Collingbourne <[email protected]> Suggested-by: Peter Collingbourne <[email protected]> Signed-off-by: Robert Foss <[email protected]> Tested-by: John Stultz <[email protected]> Tested-by: Anibal Limon <[email protected]> Acked-By: Vinod Koul <[email protected]> Tested-by: Peter Collingbourne <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> --- drivers/gpu/drm/bridge/lontium-lt9611.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c index d734d9402c35..e8eb8deb444b 100644 --- a/drivers/gpu/drm/bridge/lontium-lt9611.c +++ b/drivers/gpu/drm/bridge/lontium-lt9611.c @@ -867,8 +867,14 @@ static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge, const struct drm_display_mode *mode) { struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode); + struct lt9611 *lt9611 = bridge_to_lt9611(bridge); - return lt9611_mode ? MODE_OK : MODE_BAD; + if (!lt9611_mode) + return MODE_BAD; + else if (lt9611_mode->intfs > 1 && !lt9611->dsi1) + return MODE_PANEL; + else + return MODE_OK; } static void lt9611_bridge_pre_enable(struct drm_bridge *bridge) -- 2.27.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
