The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to
select input pixel data sampling edge. Add DT property "pixelclk-active",
same as the one used by display timings, and configure bus flags based on
this DT property.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Antonio Borneo <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Biju Das <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Philippe Cornu <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Vincent Abriou <[email protected]>
Cc: Yannick Fertre <[email protected]>
Cc: [email protected]
Cc: [email protected]
To: [email protected]
---
 drivers/gpu/drm/bridge/lvds-codec.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/bridge/lvds-codec.c 
b/drivers/gpu/drm/bridge/lvds-codec.c
index f52ccffc1bd1..bc941d4fb5b9 100644
--- a/drivers/gpu/drm/bridge/lvds-codec.c
+++ b/drivers/gpu/drm/bridge/lvds-codec.c
@@ -19,6 +19,7 @@ struct lvds_codec {
        struct device *dev;
        struct drm_bridge bridge;
        struct drm_bridge *panel_bridge;
+       struct drm_bridge_timings timings;
        struct regulator *vcc;
        struct gpio_desc *powerdown_gpio;
        u32 connector_type;
@@ -80,6 +81,7 @@ static int lvds_codec_probe(struct platform_device *pdev)
        struct device_node *panel_node;
        struct drm_panel *panel;
        struct lvds_codec *lvds_codec;
+       u32 val;
        int ret;
 
        lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
@@ -124,6 +126,12 @@ static int lvds_codec_probe(struct platform_device *pdev)
        if (IS_ERR(lvds_codec->panel_bridge))
                return PTR_ERR(lvds_codec->panel_bridge);
 
+       if (!of_property_read_u32(dev->of_node, "pixelclk-active", &val)) {
+               lvds_codec->timings.input_bus_flags = val ?
+                       DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE :
+                       DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
+       }
+
        /*
         * The panel_bridge bridge is attached to the panel's of_node,
         * but we need a bridge attached to our of_node for our user
@@ -131,6 +139,7 @@ static int lvds_codec_probe(struct platform_device *pdev)
         */
        lvds_codec->bridge.of_node = dev->of_node;
        lvds_codec->bridge.funcs = &funcs;
+       lvds_codec->bridge.timings = &lvds_codec->timings;
        drm_bridge_add(&lvds_codec->bridge);
 
        platform_set_drvdata(pdev, lvds_codec);
-- 
2.28.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to