The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency higher than 10MHz for the TX Escape Clock, thus make the target rate configurable.
Signed-off-by: Neil Armstrong <[email protected]> --- drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 25 +++++++++++++++---- include/drm/bridge/dw_mipi_dsi.h | 1 + 2 files changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c index d580b2aa4ce9..31fc965c66fd 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c @@ -562,15 +562,30 @@ static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi) static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi) { + const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops; + unsigned int esc_rate; /* in MHz */ + u32 esc_clk_division; + int ret; + /* * The maximum permitted escape clock is 20MHz and it is derived from - * lanebyteclk, which is running at "lane_mbps / 8". Thus we want: - * - * (lane_mbps >> 3) / esc_clk_division < 20 + * lanebyteclk, which is running at "lane_mbps / 8". + */ + if (phy_ops->get_esc_clk_rate) { + ret = phy_ops->get_esc_clk_rate(dsi->plat_data->priv_data, + &esc_rate); + if (ret) + DRM_DEBUG_DRIVER("Phy get_esc_clk_rate() failed\n"); + } else + esc_rate = 20; /* Default to 20MHz */ + + /* + * We want : + * (lane_mbps >> 3) / esc_clk_division < X * which is: - * (lane_mbps >> 3) / 20 > esc_clk_division + * (lane_mbps >> 3) / X > esc_clk_division */ - u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1; + esc_clk_division = (dsi->lane_mbps >> 3) / esc_rate + 1; dsi_write(dsi, DSI_PWR_UP, RESET); diff --git a/include/drm/bridge/dw_mipi_dsi.h b/include/drm/bridge/dw_mipi_dsi.h index b0e390b3288e..bda8aa7c2280 100644 --- a/include/drm/bridge/dw_mipi_dsi.h +++ b/include/drm/bridge/dw_mipi_dsi.h @@ -36,6 +36,7 @@ struct dw_mipi_dsi_phy_ops { unsigned int *lane_mbps); int (*get_timing)(void *priv_data, unsigned int lane_mbps, struct dw_mipi_dsi_dphy_timing *timing); + int (*get_esc_clk_rate)(void *priv_data, unsigned int *esc_clk_rate); }; struct dw_mipi_dsi_host_ops { -- 2.22.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
