The fixed clocks are kept under dedicated node fixed-rate-clocks, thus a fake "reg" was added. This is not correct with dtschema as fixed-clock binding does not have a "reg" property:
arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> --- arch/arm/boot/dts/exynos3250.dtsi | 42 +++++++++++++------------------ 1 file changed, 17 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index d3fb45a56527..c67c70e46794 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -97,33 +97,25 @@ }; }; - fixed-rate-clocks { - #address-cells = <1>; - #size-cells = <0>; - - xusbxti: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xusbxti"; - }; + xusbxti: clock-0 { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; - xxti: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xxti"; - }; + xxti: clock-1 { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; - xtcxo: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xtcxo"; - }; + xtcxo: clock-2 { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; }; pmu { -- 2.17.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
