Hi, Frank:
Frank Wunderlich <[email protected]> 於 2020年8月2日 週日 下午4:06寫道：
>
> > Gesendet: Sonntag, 02. August 2020 um 02:03 Uhr
> > Von: "Chun-Kuang Hu" <[email protected]>
> > An: "Frank Wunderlich" <[email protected]>
> > Cc: "Chun-Kuang Hu" <[email protected]>, "Philipp Zabel"
> > <[email protected]>, "David Airlie" <[email protected]>, "linux-kernel"
> > <[email protected]>, "DRI Development"
> > <[email protected]>, "moderated list:ARM/Mediatek SoC
> > support" <[email protected]>, "Daniel Vetter"
> > <[email protected]>, "Matthias Brugger" <[email protected]>, "Bibby
> > Hsieh" <[email protected]>, "Linux ARM"
> > <[email protected]>
> > Betreff: Re: [PATCH v2 1/5] drm/mediatek: config component output by device
> > node port
> > > +
> > > + if (comp_type != MTK_DSI && comp_type != MTK_DPI) {
> > > + port = of_graph_get_port_by_id(node, 0);
> > > + if (!port)
> > > + continue;
> > > + ep = of_get_child_by_name(port, "endpoint");
> > > + of_node_put(port);
> > > + if (!ep)
> > > + continue;
> > > + remote = of_graph_get_remote_port_parent(ep);
> > > + of_node_put(ep);
> > > + if (!remote)
> > > + continue;
> > > + of_id = of_match_node(mtk_ddp_comp_dt_ids,
> > > remote);
> > > + if (!of_id)
> > > + continue;
> > > + comp_type = (enum mtk_ddp_comp_type)of_id->data;
> > > + for (i = 0; i < private->data->main_len - 1; i++)
> > > + if (private->data->main_path[i] ==
> > > comp_id)
> > > + private->data->main_path[i + 1] =
> > > + mtk_ddp_comp_get_id(node,
> > > comp_type);
> > > + for (i = 0; i < private->data->ext_len - 1; i++)
> > > + if (private->data->ext_path[i] == comp_id)
> > > + private->data->ext_path[i + 1] =
> > > + mtk_ddp_comp_get_id(node,
> > > comp_type);
> > > + }
> >
> > The port property is not defined in binding document [1], so define it
> > in binding document first.
> >
> > [1]
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt?h=v5.8-rc7
>
> hi,
> would be the following enough for describing the ports?
>
> Port binding
> =============
>
> some nodes like
>
> - connector (e.g. hdmi-connector)
> - bls (mediatek,mt7623-disp-pwm)
> - hdmix (mediatek,mt7623-hdmi)
Now I just care about the bls to dpi. So in mediatek,disp.txt, you
just need to add a Optional properties - port (input and output), and
modify mediatek,dpi.txt for its input port.
Regards,
Chun-Kuang.
>
> can have port bindings to connect each other. Each port can have only 1
> endpoint
>
> more detail about ports/endpoints in ../../media/video-interfaces.txt
> hdmi-connector is described here: ../connector/hdmi-connector.txt
>
> example:
>
> connector {
> compatible = "hdmi-connector";
>
> port {
> hdmi_connector_in: endpoint {
> remote-endpoint = <&hdmi0_out>;
> };
> };
> };
>
>
> &bls {
> status = "okay";
>
> port {
> bls_out: endpoint {
> remote-endpoint = <&dpi0_in>;
> };
> };
> };
>
> &dpi0 {
> status = "okay";
>
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> port@0 {
> reg = <0>;
> dpi0_out: endpoint {
> remote-endpoint = <&hdmi0_in>;
> };
> };
>
> port@1 {
> reg = <1>;
> dpi0_in: endpoint {
> remote-endpoint = <&bls_out>;
> };
> };
> };
> };
>
> &hdmi0 {
>
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> port@0 {
> reg = <0>;
> hdmi0_in: endpoint {
> remote-endpoint = <&dpi0_out>;
> };
> };
>
> port@1 {
> reg = <1>;
> hdmi0_out: endpoint {
> remote-endpoint = <&hdmi_connector_in>;
> };
> };
> };
> };
>
> regards Frank
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
