If the rate in our table is _equal_ to the rate we want then it's OK
to pick it. It doesn't need to be greater than the one we want.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <[email protected]>
---
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 6ad688b320ae..be000b0ca56b 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -475,7 +475,7 @@ static int ti_sn_bridge_calc_min_dp_rate_idx(struct
ti_sn_bridge *pdata)
1000 * pdata->dp_lanes * DP_CLK_FUDGE_DEN);
for (i = 1; i < ARRAY_SIZE(ti_sn_bridge_dp_rate_lut) - 1; i++)
- if (ti_sn_bridge_dp_rate_lut[i] > dp_rate_mhz)
+ if (ti_sn_bridge_dp_rate_lut[i] >= dp_rate_mhz)
break;
return i;
--
2.26.2.526.g744177e7f7-goog
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
