Hi, On Fri, Dec 13, 2019 at 07:13:25PM +0100, Miquel Raynal wrote: > The panel common bindings provide a gpios-reset property which is > active low by default. Let's support it in the simple driver. > > De-asserting the reset pin implies a physical high, which in turns is > a logic low. > > Signed-off-by: Miquel Raynal <[email protected]>
The GPIOd API asks for a logical state, so it doesn't really matter
what the polarity of the GPIO, OUT_LOW will always mean that the reset
is deasserted (and thus, it will work even if the reset pin is active
high).
> ---
> drivers/gpu/drm/panel/panel-simple.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index 5d487686d25c..15dd495c347d 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -110,6 +110,7 @@ struct panel_simple {
> struct i2c_adapter *ddc;
>
> struct gpio_desc *enable_gpio;
> + struct gpio_desc *reset_gpio;
>
> struct drm_display_mode override_mode;
> };
> @@ -433,12 +434,21 @@ static int panel_simple_probe(struct device *dev, const
> struct panel_desc *desc)
> if (IS_ERR(panel->supply))
> return PTR_ERR(panel->supply);
>
> + panel->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(panel->reset_gpio)) {
> + err = PTR_ERR(panel->reset_gpio);
> + if (err != -EPROBE_DEFER)
> + dev_err(dev, "failed to request reset pin: %d\n", err);
> + return err;
> + }
> +
However, I'm wondering if it wouldn't be better to just have the
device maintained in reset at probe (so OUT_HIGH) and moved out of
reset during either the prepare or enable callbacks.
This is pretty much what is happening with the enable-gpios already.
Also, panels usually need to wait for a minimum time after you
deassert the reset line. How is that dealt with?
I guess a good way to do that would be to add that duration to the
panel description, since this is pretty much device specific.
Thanks!
Maxime
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
