On Wed, Oct 23, 2019 at 05:00:41PM -0700, Manasi Navare wrote: > Adaptive Sync is a VESA feature so add a DRM core helper to parse > the EDID's detailed descritors to obtain the adaptive sync monitor range. > Store this info as part fo drm_display_info so it can be used > across all drivers. > This part of the code is stripped out of amdgpu's function > amdgpu_dm_update_freesync_caps() to make it generic and be used > across all DRM drivers > > Cc: Ville Syrjälä <[email protected]> > Cc: Harry Wentland <[email protected]> > Cc: Clinton A Taylor <[email protected]> > Signed-off-by: Manasi Navare <[email protected]> > --- > drivers/gpu/drm/drm_edid.c | 49 +++++++++++++++++++++++++++++++++++++ > include/drm/drm_connector.h | 25 +++++++++++++++++++ > include/drm/drm_edid.h | 2 ++ > 3 files changed, 76 insertions(+) > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c > index 474ac04d5600..97dd1200773e 100644 > --- a/drivers/gpu/drm/drm_edid.c > +++ b/drivers/gpu/drm/drm_edid.c > @@ -4707,6 +4707,52 @@ static void drm_parse_cea_ext(struct drm_connector > *connector, > } > } > > +void drm_get_adaptive_sync_limits(struct drm_connector *connector, > + const struct edid *edid) > +{ > + struct drm_display_info *info = &connector->display_info; > + const struct detailed_timing *timing; > + const struct detailed_non_pixel *data; > + const struct detailed_data_monitor_range *range; > + int i;
This can be unsigned int.
> +
> + /*
> + * Restrict Adaptive Sync only for dp and edp
> + */
> + if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> + connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> + return;
> +
> + if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> + return;
> +
> + for (i = 0; i < 4; i++) {
> + timing = &edid->detailed_timings[i];
> + data = &timing->data.other_data;
> + range = &data->data.range;
> + /*
> + * Check if monitor has continuous frequency mode
> + */
> + if (data->type != EDID_DETAIL_MONITOR_RANGE)
> + continue;
> + /*
> + * Check for flag range limits only. If flag == 1 then
> + * no additional timing information provided.
> + * Default GTF, GTF Secondary curve and CVT are not
> + * supported
> + */
> + if (range->flags != 1)
> + continue;
> +
> + info->adaptive_sync.min_vfreq = range->min_vfreq;
> + info->adaptive_sync.max_vfreq = range->max_vfreq;
> + info->adaptive_sync.pixel_clock_mhz =
> + range->pixel_clock_mhz * 10;
> + break;
> + }
> +}
> +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> +
> /* A connector has no EDID information, so we've got no EDID to compute
> quirks from. Reset
> * all of the values which would have been set from EDID
> */
> @@ -4728,6 +4774,7 @@ drm_reset_display_info(struct drm_connector *connector)
> memset(&info->hdmi, 0, sizeof(info->hdmi));
>
> info->non_desktop = 0;
> + memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
> }
>
> u32 drm_add_display_info(struct drm_connector *connector, const struct edid
> *edid)
> @@ -4743,6 +4790,8 @@ u32 drm_add_display_info(struct drm_connector
> *connector, const struct edid *edi
>
> info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
>
> + drm_get_adaptive_sync_limits(connector, edid);
> +
> DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
>
> if (edid->revision < 3)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 5f8c3389d46f..a27a84270d8d 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -254,6 +254,26 @@ enum drm_panel_orientation {
> DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> };
>
> +/**
> + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> + * &drm_display_info
> + *
> + * This struct is used to store a Panel's Adaptive Sync capabilities
> + * as parsed from EDID's detailed monitor range descriptor block.
> + *
> + * @min_vfreq: This is the min supported refresh rate in Hz from
> + * EDID's detailed monitor range.
> + * @max_vfreq: This is the max supported refresh rate in Hz from
> + * EDID's detailed monitor range
> + * @pixel_clock_mhz: This is the dotclock in MHz from
> + * EDID's detailed monitor range
> + */
> +struct drm_adaptive_sync_info {
> + int min_vfreq;
> + int max_vfreq;
> + int pixel_clock_mhz;
Any reason why these can't be unsigned? Also, does it perhaps make sense
to store the pixel clock as kHz like we do everywhere else?
Thierry
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
