The DSI PHY regulator supports two regulator modes: LDO and DCDC. This mode can be selected using the "qcom,dsi-phy-regulator-ldo-mode" device tree property.
However, at the moment only the 20nm PHY driver actually implements that option. Add a check in the 28nm PHY driver to program the registers correctly for LDO mode. Tested-by: Nikita Travkin <[email protected]> # l8150 Signed-off-by: Stephan Gerhold <[email protected]> --- Changes in v2: Move DCDC/LDO code into separate methods v1: https://lore.kernel.org/linux-arm-msm/[email protected]/ This is needed to make the display work on Longcheer L8150, which has recently gained mainline support in: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/commit/?id=16e8e8072108426029f0c16dff7fbe77fae3df8f This patch is based on code from the downstream kernel: https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/video/msm/mdss/msm_mdss_io_8974.c?h=LA.BR.1.2.9.1-02310-8x16.0#n152 The LDO regulator configuration is taken from msm8916-qrd.dtsi: https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/arch/arm/boot/dts/qcom/msm8916-qrd.dtsi?h=LA.BR.1.2.9.1-02310-8x16.0#n56 --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 42 +++++++++++++++++----- 1 file changed, 34 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c index b3f678f6c2aa..b384ea20f359 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c @@ -39,15 +39,10 @@ static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy, DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0)); } -static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable) +static void dsi_28nm_phy_regulator_enable_dcdc(struct msm_dsi_phy *phy) { void __iomem *base = phy->reg_base; - if (!enable) { - dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0); - return; - } - dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0); dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1); dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0); @@ -56,6 +51,39 @@ static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable) dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9); dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7); dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20); + dsi_phy_write(phy->base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00); +} + +static void dsi_28nm_phy_regulator_enable_ldo(struct msm_dsi_phy *phy) +{ + void __iomem *base = phy->reg_base; + + dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0); + dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0); + dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0x7); + dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0); + dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x1); + dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x1); + dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20); + + if (phy->cfg->type == MSM_DSI_PHY_28NM_LP) + dsi_phy_write(phy->base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x05); + else + dsi_phy_write(phy->base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x0d); +} + +static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable) +{ + if (!enable) { + dsi_phy_write(phy->reg_base + + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0); + return; + } + + if (phy->regulator_ldo_mode) + dsi_28nm_phy_regulator_enable_ldo(phy); + else + dsi_28nm_phy_regulator_enable_dcdc(phy); } static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id, @@ -77,8 +105,6 @@ static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id, dsi_28nm_phy_regulator_ctrl(phy, true); - dsi_phy_write(base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00); - dsi_28nm_dphy_set_timing(phy, timing); dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00); -- 2.23.0
