On Fri, Jun 07, 2019 at 01:11:09PM +0200, H. Nikolaus Schaller wrote:
> Signed-off-by: H. Nikolaus Schaller <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
We need OK from one of the DT people before we can apply this.
Sam
> ---
> .../display/panel/ortustech,com37h3m05dtc.txt | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
>
> diff --git
> a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
> b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
> new file mode 100644
> index 000000000000..c16907c02f80
> --- /dev/null
> +++
> b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
> @@ -0,0 +1,12 @@
> +OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
> +
> +Required properties:
> +- compatible: should be "ortustech,com37h3m05dtc"
> +
> +Optional properties:
> +- enable-gpios: GPIO pin to enable or disable the panel
> +- backlight: phandle of the backlight device attached to the panel
> +- power-supply: phandle of the regulator that provides the supply voltage
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> --
> 2.19.1
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
