From: Sean Paul <[email protected]> This patch adds an override mode for kevin devices. The mode increases both back porches to allow a pixel clock of 26666kHz as opposed to the 'typical' value of 252750kHz. This is needed to avoid interference with the touch digitizer on these laptops.
Cc: Doug Anderson <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Jeffy Chen <[email protected]> Cc: Rob Herring <[email protected]> Cc: Stéphane Marchesin <[email protected]> Cc: Thierry Reding <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Sean Paul <[email protected]> Tested-by: Enric Balletbo i Serra <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> --- Changes in v5: None Changes in v4: - Rebase to top of Heiko's tree - Converted changelog to after-the-cut for non-DRM change. Changes in v3: - Unwrap the timing from display-timings and rename panel-timing (Rob) Changes in v2: - Wrap the timing in display-timings node to match binding (Rob/Thierry) arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 15e254a77391..454f4149585f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -43,6 +43,20 @@ backlight = <&backlight>; power-supply = <&pp3300_disp>; + panel-timing { + clock-frequency = <266604720>; + hactive = <2400>; + hfront-porch = <48>; + hback-porch = <84>; + hsync-len = <32>; + hsync-active = <0>; + vactive = <1600>; + vfront-porch = <3>; + vback-porch = <120>; + vsync-len = <10>; + vsync-active = <0>; + }; + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; -- 2.21.0.392.gf8f6787159e-goog _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
