Hi,
Question for Heiko cs. See below.
Let me know if there's a need for V6?
On 3/19/19 12:44 PM, Heiko Stübner wrote:
> Am Mittwoch, 6. März 2019, 23:41:10 CET schrieb Johan Jonker:
>> +static int rk3066_hdmi_connector_get_modes(struct drm_connector *connector)
>> +{
>> + struct rk3066_hdmi *hdmi = to_rk3066_hdmi(connector);
>> + struct edid *edid;
>> + int ret = 0;
>> +
Is this OK or drop it?
hdmi->hdmi_data.sink_is_hdmi = false;
>> + if (!hdmi->ddc)
>> + return 0;
>> +
>> + edid = drm_get_edid(connector, hdmi->ddc);
>> + if (edid) {
>> + hdmi->hdmi_data.sink_is_hdmi = drm_detect_hdmi_monitor(edid);
>> + drm_connector_update_edid_property(connector, edid);
>> + ret = drm_add_edid_modes(connector, edid);
>> + kfree(edid);
>> + }
>> +
>> +
>> + return ret;
>> +}
>> +static int rk3066_hdmi_bind(struct device *dev, struct device *master,
>> + void *data)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct drm_device *drm = data;
>> + struct rk3066_hdmi *hdmi;
>> + struct resource *iores;
>> + int irq;
>> + int ret;
>> +
>> + hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
>> + if (!hdmi)
>> + return -ENOMEM;
>> +
>> + hdmi->dev = dev;
>> + hdmi->drm_dev = drm;
>> +
>> + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!iores)
>> + return -ENXIO;
>> +
>> + hdmi->regs = devm_ioremap_resource(dev, iores);
>> + if (IS_ERR(hdmi->regs))
>> + return PTR_ERR(hdmi->regs);
>> +
>> + irq = platform_get_irq(pdev, 0);
>> + if (irq < 0)
>> + return irq;
>> +
>> + hdmi->hclk = devm_clk_get(dev, "hclk");
>> + if (IS_ERR(hdmi->hclk)) {
>> + dev_err(dev, "unable to get HDMI hclk clock\n");
>> + return PTR_ERR(hdmi->hclk);
>> + }
>> +
>> + ret = clk_prepare_enable(hdmi->hclk);
>> + if (ret) {
>> + dev_err(dev, "cannot enable HDMI hclk clock: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + hdmi->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
>> + "rockchip,grf");
>> + if (IS_ERR(hdmi->grf)) {
>> + dev_err(dev, "unable to get rockchip,grf\n");
>> + ret = PTR_ERR(hdmi->grf);
>> + goto err_disable_hclk;
>> + }
>> +
>> + /* internal hclk = hdmi_hclk / 25 */
>> + hdmi_writeb(hdmi, HDMI_INTERNAL_CLK_DIVIDER, 25);
>> +
>> + hdmi->ddc = rk3066_hdmi_i2c_adapter(hdmi);
>> + if (IS_ERR(hdmi->ddc)) {
>> + ret = PTR_ERR(hdmi->ddc);
>> + hdmi->ddc = NULL;
>> + goto err_disable_hclk;
>> + }
>> +
>> + rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_B);
>> + usleep_range(999, 1000);
>> + hdmi_writeb(hdmi, HDMI_INTR_MASK1, HDMI_INTR_HOTPLUG);
>> + hdmi_writeb(hdmi, HDMI_INTR_MASK2, 0);
>> + hdmi_writeb(hdmi, HDMI_INTR_MASK3, 0);
>> + hdmi_writeb(hdmi, HDMI_INTR_MASK4, 0);
>> + rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_A);
>> +
The function rk3066_hdmi_register() inits an encoder and connector.
>> + ret = rk3066_hdmi_register(drm, hdmi);
>> + if (ret)
>> + goto err_disable_hclk;
>
> goto err_disable_i2c;
>
> So that the i2c-adapter also gets disabled on error.
>
>> + dev_set_drvdata(dev, hdmi);
>> +
>> + ret = devm_request_threaded_irq(dev, irq, rk3066_hdmi_hardirq,
>> + rk3066_hdmi_irq, IRQF_SHARED,
>> + dev_name(dev), hdmi);
>> + if (ret) {
>> + dev_err(dev, "failed to request hdmi irq: %d\n", ret);
>> + goto err_disable_hclk;
>
If an error happens here the encoder and connector also have to be
removed like in the inno driver. Is that correct?
Change this to:
goto err_cleanup_hdmi;
> goto err_disable_i2c;
>
>> + }
>> +
>> + return 0;
>> +
>
What goto name would you like to have here?
err_cleanup_hdmi:
hdmi->connector.funcs->destroy(&hdmi->connector);
hdmi->encoder.funcs->destroy(&hdmi->encoder);
> err_disable_i2c:
> i2c_put_adapter(hdmi->ddc);
>
>> +err_disable_hclk:
>> + clk_disable_unprepare(hdmi->hclk);
>> +
>> + return ret;
>> +}
>> +
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
