Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain.
Signed-off-by: Rajendra Nayak <[email protected]> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 59 ++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index a3af4a1757b4..675954fde391 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1857,6 +1857,59 @@ #reset-cells = <1>; }; + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-344000000 { + opp-hz = /bits/ 64 <344000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-328580000 { + opp-hz = /bits/ 64 <328580000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + mdss: mdss@ae00000 { compatible = "qcom,sdm845-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -1901,6 +1954,8 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; assigned-clock-rates = <300000000>, <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; @@ -1947,6 +2002,8 @@ "core", "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -2013,6 +2070,8 @@ "core", "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi1_phy>; phy-names = "dsi"; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
