On Mon, Mar 04, 2019 at 03:45:56PM +0100, Noralf Trønnes wrote:
> 
> 
> Den 22.02.2019 16.58, skrev Andy Shevchenko:
> > On Fri, Feb 22, 2019 at 01:43:29PM +0100, Noralf Trønnes wrote:
> >> Buffers passed to spi_sync() must be dma-safe even for tiny buffers since
> >> some SPI controllers use DMA for all transfers.
> >>
> >> Example splat with CONFIG_DMA_API_DEBUG enabled:
> >>
> >> [   23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps 
> >> memory from stack [probable addr=000000001e49185d]
> >> [   23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 
> >> check_for_stack+0xb7/0x190
> >> [   23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) 
> >> pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn 
> >> extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 
> >> mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer 
> >> kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm
> >> [   23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236
> >> [   23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, 
> >> BIOS 542 2015.01.21:18.19.48
> >> [   23.750620] RIP: 0010:check_for_stack+0xb7/0x190
> >> [   23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 
> >> 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff 
> >> <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54
> >> [   23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286
> >> [   23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 
> >> 0000000000000006
> >> [   23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: 
> >> ffff94b33e115450
> >> [   23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 
> >> 00000000000201c0
> >> [   23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 
> >> 000000000000316c
> >> [   23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 
> >> 0000000000000001
> >> [   23.750679] FS:  0000000000000000(0000) GS:ffff94b33e100000(0063) 
> >> knlGS:00000000f7faf690
> >> [   23.750686] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
> >> [   23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 
> >> 00000000001006e0
> >> [   23.750696] Call Trace:
> >> [   23.750713]  debug_dma_map_sg+0x100/0x340
> >> [   23.750727]  ? dma_direct_map_sg+0x3b/0xb0
> >> [   23.750739]  spi_map_buf+0x25a/0x300
> >> [   23.750751]  __spi_pump_messages+0x2a4/0x680
> >> [   23.750762]  __spi_sync+0x1dd/0x1f0
> >> [   23.750773]  spi_sync+0x26/0x40
> >> [   23.750790]  mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi]
> >> [   23.750802]  ? spi_finalize_current_transfer+0x10/0x10
> >> [   23.750821]  mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi]
> >>
> > 
> > After few runs I don't see the warning anymore. So,
> > Tested-by: Andy Shevchenko <[email protected]>
> > 
> 
> Can I have an ack as well if you're satisfied with it?

Sure.

Acked-by: Andy Shevchenko <[email protected]>

I hope to see this in v5.1-rc1.
> 
> Noralf.
> 
> > Though I would like to give few more days to monitor the state.
> > (I believe it's fixed)
> > 
> >> Reported-by: Andy Shevchenko <[email protected]>
> >> Signed-off-by: Noralf Trønnes <[email protected]>
> >> ---
> >>  drivers/gpu/drm/tinydrm/ili9225.c  |  6 ++--
> >>  drivers/gpu/drm/tinydrm/mipi-dbi.c | 58 +++++++++++++++++++++---------
> >>  include/drm/tinydrm/mipi-dbi.h     |  5 +--
> >>  3 files changed, 48 insertions(+), 21 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/tinydrm/ili9225.c 
> >> b/drivers/gpu/drm/tinydrm/ili9225.c
> >> index 3f59cfbd31ba..a87078667e04 100644
> >> --- a/drivers/gpu/drm/tinydrm/ili9225.c
> >> +++ b/drivers/gpu/drm/tinydrm/ili9225.c
> >> @@ -299,7 +299,7 @@ static void ili9225_pipe_disable(struct 
> >> drm_simple_display_pipe *pipe)
> >>    mipi->enabled = false;
> >>  }
> >>  
> >> -static int ili9225_dbi_command(struct mipi_dbi *mipi, u8 cmd, u8 *par,
> >> +static int ili9225_dbi_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
> >>                           size_t num)
> >>  {
> >>    struct spi_device *spi = mipi->spi;
> >> @@ -309,11 +309,11 @@ static int ili9225_dbi_command(struct mipi_dbi 
> >> *mipi, u8 cmd, u8 *par,
> >>  
> >>    gpiod_set_value_cansleep(mipi->dc, 0);
> >>    speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1);
> >> -  ret = tinydrm_spi_transfer(spi, speed_hz, NULL, 8, &cmd, 1);
> >> +  ret = tinydrm_spi_transfer(spi, speed_hz, NULL, 8, cmd, 1);
> >>    if (ret || !num)
> >>            return ret;
> >>  
> >> -  if (cmd == ILI9225_WRITE_DATA_TO_GRAM && !mipi->swap_bytes)
> >> +  if (*cmd == ILI9225_WRITE_DATA_TO_GRAM && !mipi->swap_bytes)
> >>            bpw = 16;
> >>  
> >>    gpiod_set_value_cansleep(mipi->dc, 1);
> >> diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c 
> >> b/drivers/gpu/drm/tinydrm/mipi-dbi.c
> >> index 246e708a9ff7..4a4cd7e72938 100644
> >> --- a/drivers/gpu/drm/tinydrm/mipi-dbi.c
> >> +++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c
> >> @@ -153,16 +153,42 @@ EXPORT_SYMBOL(mipi_dbi_command_read);
> >>   */
> >>  int mipi_dbi_command_buf(struct mipi_dbi *mipi, u8 cmd, u8 *data, size_t 
> >> len)
> >>  {
> >> +  u8 *cmdbuf;
> >>    int ret;
> >>  
> >> +  /* SPI requires dma-safe buffers */
> >> +  cmdbuf = kmemdup(&cmd, 1, GFP_KERNEL);
> >> +  if (!cmdbuf)
> >> +          return -ENOMEM;
> >> +
> >>    mutex_lock(&mipi->cmdlock);
> >> -  ret = mipi->command(mipi, cmd, data, len);
> >> +  ret = mipi->command(mipi, cmdbuf, data, len);
> >>    mutex_unlock(&mipi->cmdlock);
> >>  
> >> +  kfree(cmdbuf);
> >> +
> >>    return ret;
> >>  }
> >>  EXPORT_SYMBOL(mipi_dbi_command_buf);
> >>  
> >> +/* This should only be used by mipi_dbi_command() */
> >> +int mipi_dbi_command_stackbuf(struct mipi_dbi *mipi, u8 cmd, u8 *data, 
> >> size_t len)
> >> +{
> >> +  u8 *buf;
> >> +  int ret;
> >> +
> >> +  buf = kmemdup(data, len, GFP_KERNEL);
> >> +  if (!buf)
> >> +          return -ENOMEM;
> >> +
> >> +  ret = mipi_dbi_command_buf(mipi, cmd, buf, len);
> >> +
> >> +  kfree(buf);
> >> +
> >> +  return ret;
> >> +}
> >> +EXPORT_SYMBOL(mipi_dbi_command_stackbuf);
> >> +
> >>  /**
> >>   * mipi_dbi_buf_copy - Copy a framebuffer, transforming it if necessary
> >>   * @dst: The destination buffer
> >> @@ -772,18 +798,18 @@ static int mipi_dbi_spi1_transfer(struct mipi_dbi 
> >> *mipi, int dc,
> >>    return 0;
> >>  }
> >>  
> >> -static int mipi_dbi_typec1_command(struct mipi_dbi *mipi, u8 cmd,
> >> +static int mipi_dbi_typec1_command(struct mipi_dbi *mipi, u8 *cmd,
> >>                               u8 *parameters, size_t num)
> >>  {
> >> -  unsigned int bpw = (cmd == MIPI_DCS_WRITE_MEMORY_START) ? 16 : 8;
> >> +  unsigned int bpw = (*cmd == MIPI_DCS_WRITE_MEMORY_START) ? 16 : 8;
> >>    int ret;
> >>  
> >> -  if (mipi_dbi_command_is_read(mipi, cmd))
> >> +  if (mipi_dbi_command_is_read(mipi, *cmd))
> >>            return -ENOTSUPP;
> >>  
> >> -  MIPI_DBI_DEBUG_COMMAND(cmd, parameters, num);
> >> +  MIPI_DBI_DEBUG_COMMAND(*cmd, parameters, num);
> >>  
> >> -  ret = mipi_dbi_spi1_transfer(mipi, 0, &cmd, 1, 8);
> >> +  ret = mipi_dbi_spi1_transfer(mipi, 0, cmd, 1, 8);
> >>    if (ret || !num)
> >>            return ret;
> >>  
> >> @@ -792,7 +818,7 @@ static int mipi_dbi_typec1_command(struct mipi_dbi 
> >> *mipi, u8 cmd,
> >>  
> >>  /* MIPI DBI Type C Option 3 */
> >>  
> >> -static int mipi_dbi_typec3_command_read(struct mipi_dbi *mipi, u8 cmd,
> >> +static int mipi_dbi_typec3_command_read(struct mipi_dbi *mipi, u8 *cmd,
> >>                                    u8 *data, size_t len)
> >>  {
> >>    struct spi_device *spi = mipi->spi;
> >> @@ -801,7 +827,7 @@ static int mipi_dbi_typec3_command_read(struct 
> >> mipi_dbi *mipi, u8 cmd,
> >>    struct spi_transfer tr[2] = {
> >>            {
> >>                    .speed_hz = speed_hz,
> >> -                  .tx_buf = &cmd,
> >> +                  .tx_buf = cmd,
> >>                    .len = 1,
> >>            }, {
> >>                    .speed_hz = speed_hz,
> >> @@ -819,8 +845,8 @@ static int mipi_dbi_typec3_command_read(struct 
> >> mipi_dbi *mipi, u8 cmd,
> >>     * Support non-standard 24-bit and 32-bit Nokia read commands which
> >>     * start with a dummy clock, so we need to read an extra byte.
> >>     */
> >> -  if (cmd == MIPI_DCS_GET_DISPLAY_ID ||
> >> -      cmd == MIPI_DCS_GET_DISPLAY_STATUS) {
> >> +  if (*cmd == MIPI_DCS_GET_DISPLAY_ID ||
> >> +      *cmd == MIPI_DCS_GET_DISPLAY_STATUS) {
> >>            if (!(len == 3 || len == 4))
> >>                    return -EINVAL;
> >>  
> >> @@ -850,7 +876,7 @@ static int mipi_dbi_typec3_command_read(struct 
> >> mipi_dbi *mipi, u8 cmd,
> >>                    data[i] = (buf[i] << 1) | !!(buf[i + 1] & BIT(7));
> >>    }
> >>  
> >> -  MIPI_DBI_DEBUG_COMMAND(cmd, data, len);
> >> +  MIPI_DBI_DEBUG_COMMAND(*cmd, data, len);
> >>  
> >>  err_free:
> >>    kfree(buf);
> >> @@ -858,7 +884,7 @@ static int mipi_dbi_typec3_command_read(struct 
> >> mipi_dbi *mipi, u8 cmd,
> >>    return ret;
> >>  }
> >>  
> >> -static int mipi_dbi_typec3_command(struct mipi_dbi *mipi, u8 cmd,
> >> +static int mipi_dbi_typec3_command(struct mipi_dbi *mipi, u8 *cmd,
> >>                               u8 *par, size_t num)
> >>  {
> >>    struct spi_device *spi = mipi->spi;
> >> @@ -866,18 +892,18 @@ static int mipi_dbi_typec3_command(struct mipi_dbi 
> >> *mipi, u8 cmd,
> >>    u32 speed_hz;
> >>    int ret;
> >>  
> >> -  if (mipi_dbi_command_is_read(mipi, cmd))
> >> +  if (mipi_dbi_command_is_read(mipi, *cmd))
> >>            return mipi_dbi_typec3_command_read(mipi, cmd, par, num);
> >>  
> >> -  MIPI_DBI_DEBUG_COMMAND(cmd, par, num);
> >> +  MIPI_DBI_DEBUG_COMMAND(*cmd, par, num);
> >>  
> >>    gpiod_set_value_cansleep(mipi->dc, 0);
> >>    speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1);
> >> -  ret = tinydrm_spi_transfer(spi, speed_hz, NULL, 8, &cmd, 1);
> >> +  ret = tinydrm_spi_transfer(spi, speed_hz, NULL, 8, cmd, 1);
> >>    if (ret || !num)
> >>            return ret;
> >>  
> >> -  if (cmd == MIPI_DCS_WRITE_MEMORY_START && !mipi->swap_bytes)
> >> +  if (*cmd == MIPI_DCS_WRITE_MEMORY_START && !mipi->swap_bytes)
> >>            bpw = 16;
> >>  
> >>    gpiod_set_value_cansleep(mipi->dc, 1);
> >> diff --git a/include/drm/tinydrm/mipi-dbi.h 
> >> b/include/drm/tinydrm/mipi-dbi.h
> >> index ad7e6bedab5f..464a47d1013d 100644
> >> --- a/include/drm/tinydrm/mipi-dbi.h
> >> +++ b/include/drm/tinydrm/mipi-dbi.h
> >> @@ -43,7 +43,7 @@ struct mipi_dbi {
> >>    struct spi_device *spi;
> >>    bool enabled;
> >>    struct mutex cmdlock;
> >> -  int (*command)(struct mipi_dbi *mipi, u8 cmd, u8 *param, size_t num);
> >> +  int (*command)(struct mipi_dbi *mipi, u8 *cmd, u8 *param, size_t num);
> >>    const u8 *read_commands;
> >>    struct gpio_desc *dc;
> >>    u16 *tx_buf;
> >> @@ -83,6 +83,7 @@ u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, 
> >> size_t len);
> >>  
> >>  int mipi_dbi_command_read(struct mipi_dbi *mipi, u8 cmd, u8 *val);
> >>  int mipi_dbi_command_buf(struct mipi_dbi *mipi, u8 cmd, u8 *data, size_t 
> >> len);
> >> +int mipi_dbi_command_stackbuf(struct mipi_dbi *mipi, u8 cmd, u8 *data, 
> >> size_t len);
> >>  int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
> >>                  struct drm_rect *clip, bool swap);
> >>  /**
> >> @@ -100,7 +101,7 @@ int mipi_dbi_buf_copy(void *dst, struct 
> >> drm_framebuffer *fb,
> >>  #define mipi_dbi_command(mipi, cmd, seq...) \
> >>  ({ \
> >>    u8 d[] = { seq }; \
> >> -  mipi_dbi_command_buf(mipi, cmd, d, ARRAY_SIZE(d)); \
> >> +  mipi_dbi_command_stackbuf(mipi, cmd, d, ARRAY_SIZE(d)); \
> >>  })
> >>  
> >>  #ifdef CONFIG_DEBUG_FS
> >> -- 
> >> 2.20.1
> >>
> > 

-- 
With Best Regards,
Andy Shevchenko


_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to