On 18.11.2018 22:31, Linus Walleij wrote: > After adding the hs_rate and lp_rate fields to the DSI device > we need to populate these accordingly so display drivers can > respect them. > > This figure for HS rate comes from the ILI9881C manual, the > calculation is explained in the comment. > > Cc: Daniel Vetter <[email protected]> > Cc: Andrzej Hajda <[email protected]> > Acked-by: Maxime Ripard <[email protected]> > Signed-off-by: Linus Walleij <[email protected]> > --- > ChangeLog v1->v2: > - Add LP speed after Andrzej's observation. > - Collect Maxime's ACK (hope it's fine also with the LP speed) > --- > drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c > b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c > index 3ad4a46c4e94..bd276c666318 100644 > --- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c > +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c > @@ -465,6 +465,19 @@ static int ili9881c_dsi_probe(struct mipi_dsi_device > *dsi) > dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE; > dsi->format = MIPI_DSI_FMT_RGB888; > dsi->lanes = 4; > + /* > + * The datasheet (table 39) specifies "limited clock channel speed" > + * for 4 lanes as 550 Mbps for RGB888. As this is 4 bits at the time, > + * the maximum HS frequency is 550/4 = 137.5 MHz. > + */ > + dsi->hs_rate = 137500000; > + /* > + * Table 42 says: "Length of LP-00, LP-01, LP-10 or LP-11 periods": > + * min 50ns, max 75ns. 1/50ns = max LPM rate = 20.000.000Hz. > + * Since LP transmissions are to periods per bit, this should be
s/to/two/ Reviewed-by: Andrzej Hajda <[email protected]> -- Regards Andrzej > + * 10 MHz. > + */ > + dsi->lp_rate = 10000000; > > return mipi_dsi_attach(dsi); > } _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
