On Fri, Sep 14, 2018 at 12:10:43PM +0300, Laurent Pinchart wrote:
> The R8A77990 (E3) platform has one RGB output and two LVDS outputs
> connected to the DU. Add the DT nodes for the DU, LVDS encoders and
> supporting VSP and FCP.
>
> Signed-off-by: Laurent Pinchart <[email protected]>
> Tested-by: Jacopo Mondi <[email protected]>
> ---
> arch/arm64/boot/dts/renesas/r8a77990.dtsi | 167
> ++++++++++++++++++++++++++++++
> 1 file changed, 167 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> index abb14af76c0e..600074ca3ee5 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> @@ -537,6 +537,173 @@
> resets = <&cpg 408>;
> };
These nodes should be placed after the gic to preserve the sorting
of nodes by bus address and then IP block.
> + vspb0: vsp@fe960000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfe960000 0 0x8000>;
> + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 626>;
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 626>;
> + renesas,fcp = <&fcpvb0>;
> + };
> +
> + fcpvb0: fcp@fe96f000 {
> + compatible = "renesas,fcpv";
> + reg = <0 0xfe96f000 0 0x200>;
> + clocks = <&cpg CPG_MOD 607>;
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 607>;
> + iommus = <&ipmmu_vp0 5>;
> + };
> +
> + vspi0: vsp@fe9a0000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfe9a0000 0 0x8000>;
> + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 622>;
R-Car Series, 3rd Generation, v1.00, Table Table 8A.21 indicates
that this clock should be <&cpg CPG_MOD 631>. The clock above is
(according to my reading of the documentation) correctly
used for vspd1 below.
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 631>;
> + renesas,fcp = <&fcpvi0>;
> + };
> +
> + fcpvi0: fcp@fe9af000 {
> + compatible = "renesas,fcpv";
> + reg = <0 0xfe9af000 0 0x200>;
> + clocks = <&cpg CPG_MOD 611>;
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 611>;
> + iommus = <&ipmmu_vp0 8>;
> + };
> +
> + vspd0: vsp@fea20000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfea20000 0 0x7000>;
> + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 623>;
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 623>;
> + renesas,fcp = <&fcpvd0>;
> + };
> +
> + fcpvd0: fcp@fea27000 {
> + compatible = "renesas,fcpv";
> + reg = <0 0xfea27000 0 0x200>;
> + clocks = <&cpg CPG_MOD 603>;
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 603>;
> + iommus = <&ipmmu_vi0 8>;
> + };
> +
> + vspd1: vsp@fea28000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfea28000 0 0x7000>;
> + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 622>;
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 622>;
> + renesas,fcp = <&fcpvd1>;
> + };
> +
> + fcpvd1: fcp@fea2f000 {
> + compatible = "renesas,fcpv";
> + reg = <0 0xfea2f000 0 0x200>;
> + clocks = <&cpg CPG_MOD 602>;
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 602>;
> + iommus = <&ipmmu_vi0 9>;
> + };
> +
> + du: display@feb00000 {
> + compatible = "renesas,du-r8a77990";
> + reg = <0 0xfeb00000 0 0x80000>;
> + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 724>,
> + <&cpg CPG_MOD 723>;
> + clock-names = "du.0", "du.1";
> + vsps = <&vspd0 0 &vspd1 0>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + du_out_rgb: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + du_out_lvds0: endpoint {
> + remote-endpoint = <&lvds0_in>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + du_out_lvds1: endpoint {
> + remote-endpoint = <&lvds1_in>;
> + };
> + };
> + };
> + };
> +
> + lvds0: lvds-encoder@feb90000 {
> + compatible = "renesas,r8a77990-lvds";
> + reg = <0 0xfeb90000 0 0x20>;
> + clocks = <&cpg CPG_MOD 727>;
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 727>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + lvds0_in: endpoint {
> + remote-endpoint =
> <&du_out_lvds0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + lvds0_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + lvds1: lvds-encoder@feb90100 {
> + compatible = "renesas,r8a77990-lvds";
> + reg = <0 0xfeb90100 0 0x20>;
> + clocks = <&cpg CPG_MOD 727>;
> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> + resets = <&cpg 726>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + lvds1_in: endpoint {
> + remote-endpoint =
> <&du_out_lvds1>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + lvds1_out: endpoint {
> + };
> + };
> + };
> + };
> +
> prr: chipid@fff00044 {
> compatible = "renesas,prr";
> reg = <0 0xfff00044 0 4>;
> --
> Regards,
>
> Laurent Pinchart
>
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
