On Mon, May 07, 2018 at 05:09:21PM +0200, Daniel Vetter wrote:
> On Mon, May 07, 2018 at 02:33:25PM +0100, Chris Wilson wrote:
> > Quoting Feng Tang (2018-05-07 22:26:34)
> > > Hi Chris,
> > >
> > > Thanks for the prompt review!
> > >
> > > On Mon, May 07, 2018 at 11:40:45AM +0100, Chris Wilson wrote:
> > > > Quoting Feng Tang (2018-05-07 11:36:09)
> > > > > To fulfil the Dell 4K monitor, the dpcd max retries has been bumped
> > > > > from 7 to 32, which may hurt the boot/init time for some platforms,
> > > > > as the 32 retries may take hundreds of ms.
> > > >
> > > > If we need that many retries, so be it. No modparam, the driver just has
> > > > to work.
> > >
> > > I understand your point. The retry numer was originally 7, and worked
> > > fine untill the Dell 4K monitor which changes to 32. According to my
> > > test,
> > > each retry will take about 8ms on the A3960 based NUC.
> > >
> > > One of our product need to boot up within a given time limit, this
> > > 32 retries will take about 1/3 of the budget (about 270ms), that's
> > > why I would try to make it a parameter.
> >
> > The essence is that probing whether a monitor is connected should not be
> > blocking boot. If an async probe tries and fails to find a monitor,
> > fine - no one will notice. If it does take 270ms to find a monitor, it
> > turns on 200ms after userspace kicks in, just like any other hotplug.
>
> Yeah, the fix here is to get the probing out of the driver load path, not
> to break the driver for some funky monitors. And definitely not using a
> modparam.
Hi Chris and Daniel,
After reading the i915 modeset init code, I did some experiments:
1. make the intel_modeset_init() function async (here async means
creating a async func wrapper and call async_schedul() for it)
2. make the intel_setup_outpus()+intel_modeset_setup_hw_state() async
But both of them will trigger kernel panic (log msg pasted in the end),
did I made some mistakes, or maybe the i915 codes following these functions
has dependency over them?
IIUC the dpcd access first happens in
i915_driver_load --> i915_load_modeset_init --> intel_modeset_init
--> intel_setup_outputs --> intel_ddi_init --> intel_edp_init_connector
--> intel_edp_init_dpcd (to check if DPCD exist)
Should we postpone it to later phase or even after user space kick in?
Thanks,
Feng
---
Error msg for my async experiment:
[ 0.715706] No backend configured for hyper_dmabuf in kernel config
[ 0.716079] Hyper_dmabuf: no backend found
[ 0.736361] intel_powerclamp: CPU does not support MWAIT
[ 0.737643] [drm:wait_panel_status] *ERROR* PPS state mismatch
[ 0.741381] genirq: Setting trigger mode 3 for irq 127 failed
(intel_gpio_irq_type+0x0/0x110)
[ 0.743244] dmi-sysfs: dmi entry is absent.
[ 0.765116] [edp_panel_vdd_on()]: exit
[ 0.765360] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 0.765809] IP: (null)
[ 0.766005] PGD 0 P4D 0
[ 0.766168] Oops: 0010 [#1] PREEMPT SMP
[ 0.766401] Modules linked in:
[ 0.766592] CPU: 0 PID: 28 Comm: kworker/u8:1 Tainted: G U W
4.14.39-sos+ #26
[ 0.767075] Workqueue: events_unbound async_run_entry_fn
[ 0.767392] task: ffff88027433c240 task.stack: ffff880274340000
[ 0.767743] RIP: 0010: (null)
[ 0.767969] RSP: 0000:ffff880274343ab8 EFLAGS: 00010246
[ 0.768281] RAX: 0000000000000000 RBX: 000000002d4003ff RCX: 0000000000000001
[ 0.768701] RDX: 0000000080000000 RSI: 0000000000000000 RDI: ffff880272f21100
[ 0.769121] RBP: 0000000000000000 R08: 000000002d4003ff R09: 0000000000000001
[ 0.769541] R10: ffff880274343a60 R11: ffffffff82e7fe0d R12: 0000000000000001
[ 0.769961] R13: ffff880273038000 R14: 0000000000000004 R15: ffff880272f21100
[ 0.770383] FS: 0000000000000000(0000) GS:ffff88027dc00000(0000)
knlGS:0000000000000000
[ 0.770858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.771199] CR2: 0000000000000000 CR3: 0000000002613000 CR4: 00000000003426f0
[ 0.771619] Call Trace:
[ 0.771779] ? intel_dp_aux_ch+0x1a7/0x770
[ 0.772031] ? remove_wait_queue+0x60/0x60
[ 0.772281] ? intel_dp_aux_transfer+0xa6/0x200
[ 0.772556] ? drm_dp_dpcd_access+0x9d/0x150
[ 0.772815] ? drm_dp_dpcd_read+0x2c/0x60
[ 0.773059] ? drm_dp_read_desc+0x43/0xf0
[ 0.773303] ? intel_dp_detect+0x346/0x6a0
[ 0.773554] ? drm_helper_probe_single_connector_modes+0xcd/0x6b0
[ 0.773920] ? _raw_spin_unlock+0x14/0x30
[ 0.774165] ? vt_console_print+0x22a/0x3d0
[ 0.774420] ? preempt_count_add+0x56/0xa0
[ 0.774669] ? _raw_spin_lock_irqsave+0x32/0x40
[ 0.774944] ? drm_setup_crtcs+0x143/0x9e0
[ 0.775195] ? __drm_fb_helper_initial_config_and_unlock+0x3f/0x410
[ 0.775567] ? mutex_lock+0x1c/0x40
[ 0.775783] ? intel_fbdev_initial_config+0x14/0x30
[ 0.776076] ? async_run_entry_fn+0x39/0x160
[ 0.776335] ? process_one_work+0x14a/0x3c0
[ 0.776588] ? worker_thread+0x4d/0x3e0
[ 0.776823] ? kthread+0x10a/0x140
[ 0.777031] ? process_one_work+0x3c0/0x3c0
[ 0.777284] ? kthread_create_on_node+0x40/0x40
[ 0.777557] ? ret_from_fork+0x3a/0x50
[ 0.777785] Code: Bad RIP value.
[ 0.777995] RIP: (null) RSP: ffff880274343ab8
[ 0.778305] CR2: 0000000000000000
[ 0.778508] ---[ end trace f4e157ae338a4060 ]---
[ 0.778786] Kernel panic - not syncing: Fatal exception
[ 0.779160] Kernel Offset: disabled
[ 0.779376] Rebooting in 10 seconds..
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
