Currently HDMI 2.0 PHYs do not have a default configuration function. As these PHYs have the same register layout as the 3D PHYs we can safely use the default configuration function. If, for some reason, the PHY is custom this change will not make any impact because in configuration function we prefer the pdata provided configuration function over the internal one.
This patch is based on today's drm-misc-next branch. Signed-off-by: Jose Abreu <[email protected]> Cc: Kieran Bingham <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Archit Taneja <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: Mark Yao <[email protected]> Cc: Carlos Palminha <[email protected]> --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index ead1124..10c8d8c 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -2170,6 +2170,7 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id) .name = "DWC HDMI 2.0 TX PHY", .gen = 2, .has_svsret = true, + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, }, { .type = DW_HDMI_PHY_VENDOR_PHY, .name = "Vendor PHY", -- 1.9.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
