在 2017-05-15 17:24，Maxime Ripard 写道：
On Mon, May 15, 2017 at 12:30:43AM +0800, Icenowy Zheng wrote:+ de2_clocks: clock@1000000 {display_clocks would be better there, we don't have to dissociate de1 with de2
How about de_clocks ? (See A80 DTSI)
+ compatible = "allwinner,sun8i-v3s-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + de2_mixer0: mixer@1100000 {and mixer0 here is enough too. Is there several of them? Why not just use mixer if there's only one?
Nope, here it's tagged 0 only for consistency with other SoCs.
+ compatible = "allwinner,sun8i-v3s-de2-mixer"; + reg = <0x01100000 0x100000>; + clocks = <&de2_clocks CLK_MIXER0>, + <&de2_clocks CLK_BUS_MIXER0>; + clock-names = "mod", + "bus"; + resets = <&de2_clocks RST_MIXER0>; + assigned-clocks = <&de2_clocks CLK_MIXER0>; + assigned-clock-rates = <150000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mixer0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-v3s-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, + <&ccu CLK_TCON0>; + clock-names = "ahb", + "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_TCON0>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + +You have an extra new line here. Maxime
_______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
