Some panels need to be configured with commands sent over the MIPI link, which they will do in the prepare hook. Call this after the PHY has been initialized so that we are able to send commands to the panel.
Signed-off-by: John Keeping <[email protected]> Reviewed-by: Chris Zhong <[email protected]> Reviewed-by: Sean Paul <[email protected]> --- v4: - Add Sean's Reviewed-by v3: - Add Chris' Reviewed-by Unchanged in v2 --- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index 0c66e6eaf44a..53515404d0ca 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -898,12 +898,14 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder) dw_mipi_dsi_dphy_timing_config(dsi); dw_mipi_dsi_dphy_interface_config(dsi); dw_mipi_dsi_clear_err(dsi); - if (drm_panel_prepare(dsi->panel)) - dev_err(dsi->dev, "failed to prepare panel\n"); dw_mipi_dsi_phy_init(dsi); dw_mipi_dsi_wait_for_two_frames(mode); + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); + if (drm_panel_prepare(dsi->panel)) + dev_err(dsi->dev, "failed to prepare panel\n"); + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE); drm_panel_enable(dsi->panel); -- 2.12.0.rc0.230.gf625d4cdb9.dirty _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
