Hi Thierry, On Mon, Feb 06, 2017 at 02:05:49PM +0100, Thierry Reding wrote: > On Fri, Feb 03, 2017 at 10:59:05AM +0100, Maxime Ripard wrote: > > The Sitronix ST7789V is an LCD panel controller, controlled over SPI, that > > can drive 18-bits 240x320 LCD displays. > > > > Signed-off-by: Maxime Ripard <[email protected]> > > --- > > Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt | 36 > > ++++++++++++++++++++++++++++++++++++ > > 1 file changed, 36 insertions(+), 0 deletions(-) > > create mode 100644 > > Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt > > > > diff --git > > a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt > > b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt > > new file mode 100644 > > index 000000000000..f70e6e9c54ed > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt > > @@ -0,0 +1,36 @@ > > +Sitronix ST7789V RGB panel with SPI control bus > > + > > +Required properties: > > + - compatible: "sitronix,st7789v" > > + - reg: Chip select of the panel on the SPI bus > > + - reset-gpios: a GPIO phandle for the reset pin > > Shouldn't this have some sort of power supply?
On the board I currently have, it's just tied to an always on regulator, but you're right, I'll add it. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
