The initial state at boot is assumed to be disconnected, and we hope
to receive an interrupt to update the status. Let's be more explicit
about the current state - reading the PHY status register tells us
the current level of the hotplug signal, which we can report back in
the _detect() method.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
This fix should go in for -rc - though it's probably too late to get it
in for 3.15, it may be considered as a potential stable candidate. If
not, can we get this in for 3.16-rc1 please?
Thanks.
drivers/staging/imx-drm/imx-hdmi.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/imx-drm/imx-hdmi.c
b/drivers/staging/imx-drm/imx-hdmi.c
index d47dedd2cdb4..6f5efcc89880 100644
--- a/drivers/staging/imx-drm/imx-hdmi.c
+++ b/drivers/staging/imx-drm/imx-hdmi.c
@@ -120,8 +120,6 @@ struct imx_hdmi {
struct clk *isfr_clk;
struct clk *iahb_clk;
- enum drm_connector_status connector_status;
-
struct hdmi_data_info hdmi_data;
int vic;
@@ -1382,7 +1380,9 @@ static enum drm_connector_status
imx_hdmi_connector_detect(struct drm_connector
{
struct imx_hdmi *hdmi = container_of(connector, struct imx_hdmi,
connector);
- return hdmi->connector_status;
+
+ return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
+ connector_status_connected : connector_status_disconnected;
}
static int imx_hdmi_connector_get_modes(struct drm_connector *connector)
@@ -1524,7 +1524,6 @@ static irqreturn_t imx_hdmi_irq(int irq, void *dev_id)
hdmi_modb(hdmi, 0, HDMI_PHY_HPD, HDMI_PHY_POL0);
- hdmi->connector_status = connector_status_connected;
imx_hdmi_poweron(hdmi);
} else {
dev_dbg(hdmi->dev, "EVENT=plugout\n");
@@ -1532,7 +1531,6 @@ static irqreturn_t imx_hdmi_irq(int irq, void *dev_id)
hdmi_modb(hdmi, HDMI_PHY_HPD, HDMI_PHY_HPD,
HDMI_PHY_POL0);
- hdmi->connector_status = connector_status_disconnected;
imx_hdmi_poweroff(hdmi);
}
drm_helper_hpd_irq_event(hdmi->connector.dev);
@@ -1606,7 +1604,6 @@ static int imx_hdmi_bind(struct device *dev, struct
device *master, void *data)
return -ENOMEM;
hdmi->dev = dev;
- hdmi->connector_status = connector_status_disconnected;
hdmi->sample_rate = 48000;
hdmi->ratio = 100;
--
1.8.3.1
