Hi,
I installed DirectFb on fedora 7, the machine has a Nvidia graphics card. The
installation was successful and I can play the examples provided by the Direct
fb website, but, I find that the accelarator is not getting recognised. when I
do "fbset -i", the details shown are as below, it gives the accelerator as
Unknown(46). The output for dfbinfo is also pasted below.
How do I test to know whether the hardware is getting used. When I play any of
the Directfb examples with "--dfb:no-software" option, the screen goes blank.
Otherwise it play well on the screen. Also, after installation of directfb I
could not find the directfbrc file under /etc/.
Can anyone help me on this.
fbset -I output
mode "1280x1024-60"
# D: 108.003 MHz, H: 63.983 kHz, V: 60.021 Hz
geometry 1280 1024 1280 32767 8
timings 9259 248 48 38 1 112 3
hsync high
vsync high
accel true
rgba 8/0,8/0,8/0,0/0
endmode
Frame buffer device information:
Name : NV3d
Address : 0xe0000000
Size : 268435456
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 8
YPanStep : 1
YWrapStep : 0
LineLength : 1280
MMIO Address: 0xfb000000
MMIO Size : 16777216
Accelerator : Unknown (46)
dfbinfo output:
(*) DirectFB/Core: Single Application Core. (2009-06-02 09:16)
(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0]
<8388608>...
(*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
(*) Direct/Thread: Started 'Keyboard Input' (-1) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: Keyboard 0.9 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: ImPS/2 Generic Wheel Mouse (1) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (26683) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: AT Translated Set 2 keyboard (2) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: PC Speaker (3) 0.1 (directfb.org)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: nVidia NV4C (04c0) 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) FBDev/Mode: Setting 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (virtual 640x480) at 8 bit (LUT8), pitch 640
(*) FBDev/Surface: Allocated 640x480 8 bit LUT8 buffer (index 0) at offset 0
and pitch 640.
Screen (00) NVidia Primary Screen (primary screen)
Caps: VSYNC POWER_MANAGEMENT
Layer (00) FBDev Primary Layer (primary layer)
Type: GRAPHICS
Caps: SURFACE BRIGHTNESS CONTRAST SATURATION
Layer (01) NVidia Overlay
Type: VIDEO STILL_PICTURE
Caps: SURFACE SCREEN_LOCATION DEINTERLACING DST_COLORKEY BRIGHTNESS
CONTRAST HUE SATURATION SCREEN_POSITION SCREEN_SIZE
Regards,
Ifthekar
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message. Further, you are
not
to copy, disclose, or distribute this e-mail or its contents to any other
person and
any such actions are unlawful. This e-mail may contain viruses. Infosys has
taken
every reasonable precaution to minimize this risk, but is not liable for any
damage
you may sustain as a result of any virus in this e-mail. You should carry out
your
own virus checks before opening the e-mail or attachment. Infosys reserves the
right to monitor and review the content of all messages sent to or from this
e-mail
address. Messages sent to or from this e-mail address may be stored on the
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
_______________________________________________
directfb-dev mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev
