- I noticed that the vlan package was last updated in 2005 and that the vconfig site said that 802.1Q VLAN code is part of the official kernel, and has been for years and years. It is very unlikely that you need to download anything from this site, the packages are left here for posterity's sake. 802.1Q VLANs can be created with the 'ip' utility (vconfig works for vlans, but is crufty and deprecated). - Based on this it seemed appropriate to replace the vconfig commands with ip commands. - This patch set has been sent as an RFC PATCH as my replacement ip commands may or may not be correct and I am unable to test the effect as I do not have a pppoe connection using vlans. - I am open to any modifications or any other decision with reagard to the vlan package
Signed-off-by: Adolf Belka <[email protected]> --- src/initscripts/networking/red | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/initscripts/networking/red b/src/initscripts/networking/red index fddc70d92..6d779b365 100644 --- a/src/initscripts/networking/red +++ b/src/initscripts/networking/red @@ -251,7 +251,7 @@ case "${1}" in if [ "$TYPE" == "vdsl" ]; then boot_mesg "Creating VLAN Interface ${DEVICE}.${INET_VLAN} ..." modprobe 8021q - vconfig add ${DEVICE} ${INET_VLAN} + ip link add link ${DEVICE} name ${DEVICE}.${INET_VLAN} type vlan id ${INET_VLAN} if [ -n "$MAC1" ]; then boot_mesg "Setting mac address on ${DEVICE}.${INET_VLAN} to ${MAC1}" ip link set dev ${DEVICE}.${INET_VLAN} address ${MAC1} @@ -276,7 +276,7 @@ case "${1}" in if [ ! -f "$PIDFILE" ]; then boot_mesg "Creating VLAN Interface ${DEVICE}.${IPTV_VLAN} ..." modprobe 8021q - vconfig add ${DEVICE} ${IPTV_VLAN} + ip link add link ${DEVICE} name ${DEVICE}.${IPTV_VLAN} type vlan id ${IPTV_VLAN} if [ -n "$MAC2" ]; then boot_mesg "Setting mac address on ${DEVICE}.${IPTV_VLAN} to ${MAC2}" ip link set dev ${DEVICE}.${IPTV_VLAN} address ${MAC2} @@ -548,7 +548,7 @@ case "${1}" in if echo "${link_status}" | grep -q UP; then boot_mesg "Bringing down the ${DEVICE}.${INET_VLAN} interface..." ip link set ${DEVICE}.${INET_VLAN} down - vconfig rem ${DEVICE}.${INET_VLAN} + ip link delete ${DEVICE}.${INET_VLAN} evaluate_retval fi else -- 2.49.0
