This is the output of NFS01 Test: *** BEGIN OF TEST LIBBSD NFS 1 *** *** TEST VERSION: 6.0.0.e5b6fa026ac1c07d252233624054785b2b29f54e *** TEST STATE: USER_INPUT *** TEST BUILD: RTEMS_POSIX_API *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 4c6dfb7aef9811258457971aa9213d5aebb9ce8d, Newlib 1ed1516) nexus0: <RTEMS Nexus device> cgem0: <Cadence CGEM Gigabit Ethernet Interface> on nexus0 miibus0: <MII bus> on cgem0 info: cgem0: Ethernet address: 92:c2:88:7d:f4:79 arasan_sdhci1: <Arasan SDIO> on nexus0 arasan_sdhci1-slot0: Hardware doesn't specify base clock frequency, using 50MHz as default. arasan_sdhci1-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. arasan_sdhci1-slot0: Hardware doesn't report any support voltages. arasan_sdhci1: Card Detect failed to stabilize, setting to not present. arasan_sdhci0: <Arasan SDIO> on nexus0 arasan_sdhci0-slot0: Hardware doesn't specify base clock frequency, using 50MHz as default. arasan_sdhci0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. mmc0: <MMC/SD bus> on arasan_sdhci0 zy7_slcr0: <Zynq-7000 slcr block> on nexus0 mmcsd0: 16GB <SDHC SC16G 8.0 SN E237916D MFG 01/2021 by 3 SD> (read-only) at mmc0 50.0MHz/4bit/65535-block info: lo0: link state changed to UP add host 141.14.128.128: gateway cgem0 add net default: gateway 141.14.128.128 error: cgem0: no active link assertion "seconds < 10" failed: file "../../testsuite/include/rtems/bsd/test/default-network-init.h", line 193, function: default_wait_for_link_up
*** FATAL *** fatal source: 7 (RTEMS_FATAL_SOURCE_ASSERT) fatal code: 3443784 (0x00348c48) RTEMS version: 6.0.0.e5b6fa026ac1c07d252233624054785b2b29f54e RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 4c6dfb7aef9811258457971aa9213d5aebb9ce8d, Newlib 1ed1516) executing thread ID: 0x0a010001 executing thread name: UI1 Heinz > On 13. Aug 2024, at 16:40, Heinz Junkes <jun...@fhi-berlin.mpg.de> wrote: > > Hi, > unfortunately I cannot activate the cgem0 network interface with RTEMS 6 > (libbsd 6-freebsd-12) > on a xilinx_zynq_zybo_z7 board : > > cgem0: flags43<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > d options008<VLAN_MTU,LINKSTATE> > e ether 92:c2:88:7d:f4:79 > inet6 fe80::90c2:88ff:fe7d:f479%cgem0 prefixlen 64 scopeid 0x1 > b inet 141.14.128.72 netmask 0xfffff000 broadcast 141.14.143.255 > u nd6 options!<PERFORMNUD,AUTO_LINKLOCAL> > ifconfig: cgem0: ngo media types?: cgem0: sending ARP announce (1 of 2), next > in 2.0 seconds > > > These messages appear during startup : > > ***** Initializing network (libbsd, dhcpcd) ***** > nexus0: <RTEMS Nexus device> > cgem0: <Cadence CGEM Gigabit Ethernet Interface> on nexus0 > miibus0: <MII bus> on cgem0 > info: cgem0: Ethernet address: 92:c2:88:7d:f4:79 > arasan_sdhci1: <Arasan SDIO> on nexus0 > arasan_sdhci1-slot0: Hardware doesn't specify base clock frequency, using > 50MHz as default. > arasan_sdhci1-slot0: Hardware doesn't specify timeout clock frequency, > setting BROKEN_TIMEOUT quirk. > arasan_sdhci1-slot0: Hardware doesn't report any support voltages. > arasan_sdhci1: Card Detect failed to stabilize, setting to not present. > arasan_sdhci0: <Arasan SDIO> on nexus0 > arasan_sdhci0-slot0: Hardware doesn't specify base clock frequency, using > 50MHz as default. > arasan_sdhci0-slot0: Hardware doesn't specify timeout clock frequency, > setting BROKEN_TIMEOUT quirk. > mmc0: <MMC/SD bus> on arasan_sdhci0 > zy7_slcr0: <Zynq-7000 slcr block> on nexus0 > mmcsd0: 16GB <SDHC SC16G 8.0 SN E237916D MFG 01/2021 by 3 SD> (read-only) at > mmc0 50.0MHz/4bit/65535-block > > I have already found a suitable entry here, but unfortunately I don't know > how it 'fits' my problem: > https://lists.rtems.org/pipermail/users/2023-July/068855.html > > > Danke Heinz_______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
