Folks,
this patch revert was missing in Gedare's series of reverting CAN-based
patches in preparation for RTEMS 6 release. Due to this all beagleboard
based BSPs fail to build due to error like:
Failures:
1 debug arm/beagleboardorig build:
configure: /export/home/rtems/git/rtems/ACTIVE_ZONE/stm32h7-new-\
hal/waf configure --prefix=/tmp/rtems-test.1033228\
--top=/export/home/rtems/git/rtems/ACTIVE_ZONE/stm32h7-new-hal\
--rtems-config=config-arm-beagleboardorig-debug.ini
error: export/home/rtems/git/bsps/arm/beagle/dcan/am335x-
dcan.c:37:10: fatal error: dev/can/can.h: No such file or
directory
Thanks,
Karel
On 7/31/23 20:07, Karel Gardas wrote:
This reverts commit 26d50bdfb601b9ef71ec2b30d2d9467c2437f443.
---
bsps/arm/beagle/dcan/am335x-dcan.c | 104 -
bsps/arm/beagle/dcan/dcan.c | 646 --
bsps/arm/beagle/dcan/hw_cm_per.h | 1407 ---
bsps/arm/beagle/dcan/hw_dcan.h | 1289 ---
bsps/arm/beagle/include/bsp/am335x_dcan.h | 106 -
.../beagle/include/bsp/hw_control_AM335x.h | 7794 -----------------
bsps/arm/beagle/include/bsp/soc_AM335x.h | 206 -
spec/build/bsps/arm/beagle/obj.yml | 2 -
8 files changed, 11554 deletions(-)
delete mode 100644 bsps/arm/beagle/dcan/am335x-dcan.c
delete mode 100644 bsps/arm/beagle/dcan/dcan.c
delete mode 100755 bsps/arm/beagle/dcan/hw_cm_per.h
delete mode 100755 bsps/arm/beagle/dcan/hw_dcan.h
delete mode 100644 bsps/arm/beagle/include/bsp/am335x_dcan.h
delete mode 100755 bsps/arm/beagle/include/bsp/hw_control_AM335x.h
delete mode 100755 bsps/arm/beagle/include/bsp/soc_AM335x.h
_______________________________________________
devel mailing list
devel@rtems.org
http://lists.rtems.org/mailman/listinfo/devel
