On 29/7/2023 12:08 pm, Muhammad Sulthan Mazaya wrote: > Add leon3 implementation for rtems-test using renode. > > --- > .../testing/bsps/kendrytek210-renode.ini | 38 ++++++++++ > tester/rtems/testing/bsps/leon3-renode.ini | 37 ++++++++++ > tester/rtems/testing/renode.cfg | 65 ++++++++++++++++++ > .../testing/renode_scripts/kendrytek210.resc | 53 ++++++++++++++ > .../testing/renode_scripts/leon3-prom.bin | Bin 0 -> 529 bytes > .../rtems/testing/renode_scripts/leon3.resc | 47 +++++++++++++ > 6 files changed, 240 insertions(+) > create mode 100644 tester/rtems/testing/bsps/kendrytek210-renode.ini > create mode 100644 tester/rtems/testing/bsps/leon3-renode.ini > create mode 100644 tester/rtems/testing/renode.cfg > create mode 100644 tester/rtems/testing/renode_scripts/kendrytek210.resc > create mode 100755 tester/rtems/testing/renode_scripts/leon3-prom.bin
This file does not look like a script to me. I suggest removing _scripts from the path, eg: tester/rtems/testing/renode/leon3-prom.bin What is this file and where did it come from? I see no attribution or sources to make this binary file? Chris > create mode 100644 tester/rtems/testing/renode_scripts/leon3.resc > > diff --git a/tester/rtems/testing/bsps/kendrytek210-renode.ini > b/tester/rtems/testing/bsps/kendrytek210-renode.ini > new file mode 100644 > index 0000000..95850c5 > --- /dev/null > +++ b/tester/rtems/testing/bsps/kendrytek210-renode.ini > @@ -0,0 +1,38 @@ > +# > +# RTEMS Tools Project (http://www.rtems.org/) > +# Copyright 2010-2014 Chris Johns (chr...@rtems.org) > +# All rights reserved. > +# > +# This file is part of the RTEMS Tools package in 'rtems-tools'. > +# > +# Redistribution and use in source and binary forms, with or without > +# modification, are permitted provided that the following conditions are met: > +# > +# 1. Redistributions of source code must retain the above copyright notice, > +# this list of conditions and the following disclaimer. > +# > +# 2. Redistributions in binary form must reproduce the above copyright > notice, > +# this list of conditions and the following disclaimer in the documentation > +# and/or other materials provided with the distribution. > +# > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" > +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE > +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE > +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE > +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR > +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF > +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS > +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN > +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) > +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE > +# POSSIBILITY OF SUCH DAMAGE. > +# > + > +# > +# The Kendrytek210 Renode BSP > +# > +[kendrytek210-renode] > +bsp = kendrytek210-renode > +arch = riscv > +tester = %{_rtscripts}/renode.cfg > +bsp_resc_script = %{_rtscripts}/renode_scripts/kendrytek210.resc > diff --git a/tester/rtems/testing/bsps/leon3-renode.ini > b/tester/rtems/testing/bsps/leon3-renode.ini > new file mode 100644 > index 0000000..af48043 > --- /dev/null > +++ b/tester/rtems/testing/bsps/leon3-renode.ini > @@ -0,0 +1,37 @@ > +# > +# RTEMS Tools Project (http://www.rtems.org/) > +# Copyright 2010-2014 Chris Johns (chr...@rtems.org) > +# All rights reserved. > +# > +# This file is part of the RTEMS Tools package in 'rtems-tools'. > +# > +# Redistribution and use in source and binary forms, with or without > +# modification, are permitted provided that the following conditions are met: > +# # 1. Redistributions of source code must retain the above copyright notice, > +# this list of conditions and the following disclaimer. > +# > +# 2. Redistributions in binary form must reproduce the above copyright > notice, > +# this list of conditions and the following disclaimer in the documentation > +# and/or other materials provided with the distribution. > +# > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" > +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE > +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE > +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE > +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR > +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF > +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS > +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN > +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) > +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE > +# POSSIBILITY OF SUCH DAMAGE. > +# > + > +# > +# The Leon3 Renode BSP > +# > +[leon3-renode] > +bsp = leon3-renode > +arch = sparc > +tester = %{_rtscripts}/renode.cfg > +bsp_resc_script = %{_rtscripts}/renode_scripts/leon3.resc > diff --git a/tester/rtems/testing/renode.cfg b/tester/rtems/testing/renode.cfg > new file mode 100644 > index 0000000..a6b13ec > --- /dev/null > +++ b/tester/rtems/testing/renode.cfg > @@ -0,0 +1,65 @@ > +# > +# RTEMS Tools Project (http://www.rtems.org/) > +# Copyright 2010-2014 Chris Johns (chr...@rtems.org) > +# All rights reserved. > +# > +# This file is part of the RTEMS Tools package in 'rtems-tools'. > +# > +# Redistribution and use in source and binary forms, with or without > +# modification, are permitted provided that the following conditions are met: > +# > +# 1. Redistributions of source code must retain the above copyright notice, > +# this list of conditions and the following disclaimer. > +# > +# 2. Redistributions in binary form must reproduce the above copyright > notice, > +# this list of conditions and the following disclaimer in the documentation > +# and/or other materials provided with the distribution. > +# > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" > +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE > +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE > +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE > +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR > +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF > +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS > +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN > +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) > +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE > +# POSSIBILITY OF SUCH DAMAGE. > +# > + > +# > +# Renode > +# > +# Use a renode command to run the executable in the renode simulator. > +# > + > +%include %{_configdir}/base.cfg > +%include %{_configdir}/checks.cfg > + > +# > +# Console. > +# > +%define console_telnet > +%include %{_configdir}/console.cfg > + > +# > +# RTEMS version > +# > +%include %{_rtdir}/rtems/version.cfg > + > + > +# > +# Renode executable > +# > +%define renode_cmd renode --hide-monitor > +%define binary_opts -e $bin?=@%{test_executable} > +%define start_opts -e "s @%{bsp_resc_script}" > +%define add_path -e "path add @%{_rttesting}/renode_scripts" > +%define trim_command sed 's/.*\[output\] //' > + > + > +# > +# Executable > +# > +%execute %{renode_cmd} %{binary_opts} %{add_path} %{start_opts} | > %{trim_command} > diff --git a/tester/rtems/testing/renode_scripts/kendrytek210.resc > b/tester/rtems/testing/renode_scripts/kendrytek210.resc > new file mode 100644 > index 0000000..fe13aa8 > --- /dev/null > +++ b/tester/rtems/testing/renode_scripts/kendrytek210.resc > @@ -0,0 +1,53 @@ > +using sysbus > +using monitor > + > +mach create "K210" > + > +machine LoadPlatformDescription @platforms/cpus/kendryte_k210.repl > + > +path add @/ > + > +showAnalyzer "uartAnalyzer" uart > Antmicro.Renode.Analyzers.LoggingUartAnalyzer > +uartAnalyzer TimestampFormat None > + > +set report_repeating_line """ > +from Antmicro.Renode.Logging import ConsoleBackend > +ConsoleBackend.Instance.ReportRepeatingLines = True > +""" > + > +set add_hook """ > +def match(line): > + ok_to_kill_lines = [ > + '*** TEST STATE: USER_INPUT', > + '*** TEST STATE: BENCHMARK', > + '*** END OF TEST ', > + '*** FATAL ***' > + ] > + return any(l in line for l in ok_to_kill_lines) > + > +def hook(line): > + monitor.Parse("q") > + > +Antmicro.Renode.Hooks.UartHooksExtensions.AddLineHook(monitor.Machine["sysbus.uart"], > match, hook) > +""" > + > +python $add_hook > + > +python $report_repeating_line > + > +sysbus Tag <0x50440000 0x10000> "SYSCTL" > +sysbus Tag <0x50440018 0x4> "pll_lock" 0xFFFFFFFF > +sysbus Tag <0x5044000C 0x4> "pll1" > +sysbus Tag <0x50440008 0x4> "pll0" > +sysbus Tag <0x50440020 0x4> "clk_sel0" > +sysbus Tag <0x50440028 0x4> "clk_en_cent" > +sysbus Tag <0x5044002c 0x4> "clk_en_peri" > + > +# enable uart tx > +uart WriteDoubleWord 0x8 0x1 > + > +macro reset > +""" > + sysbus LoadELF $bin > +""" > +runMacro $reset > diff --git a/tester/rtems/testing/renode_scripts/leon3-prom.bin > b/tester/rtems/testing/renode_scripts/leon3-prom.bin > new file mode 100755 > index > 0000000000000000000000000000000000000000..a42628906b6915c589f6be96fe5de82a940c6529 > GIT binary patch > literal 529 > zcmYk&F-yZh6bJBsQma+O9uC$)FhikhM;GxB2R}yq7LJ!#(<mZEM2ZwSt%!*D2?}kc > z4h|h01RaFy;NT$Q;2>1uKedqte%#A@3Gco0o*blrF<-dG3t@Q`z^jr1PRRmTcO>iC > zTMbzff4Mk6N(p6;z9(^cO(Mvc#gPB)(jM)TrZYOH3%aB$x~3bd&;cFN5mo7!YIH(@ > zHr8A-`tS_k3&-Z%*61Ed|M=Wmr=mNpLf5ht@^Nm00@2%SXIf~_w{S=I)TIY{q-T1e > z9=*~Vz0)Us(Kr3jXs;yR(V5jGPEMhaPGYtnJn{XMi)JARO?FmcCa(Kp$?ZU5yQrs! > zJ54GrZPv$AD}B~Ckj{rrNz}U?M<NX<pLe3P0rwm9@F8u{jQW9NtmRx3HF9;+C@8B| > S&~A#~dM!DadpO4bG4%^DAaPm% > > literal 0 > HcmV?d00001 > > diff --git a/tester/rtems/testing/renode_scripts/leon3.resc > b/tester/rtems/testing/renode_scripts/leon3.resc > new file mode 100644 > index 0000000..37f5f2b > --- /dev/null > +++ b/tester/rtems/testing/renode_scripts/leon3.resc > @@ -0,0 +1,47 @@ > +using sysbus > +using monitor > + > +mach create "leon3" > + > +machine LoadPlatformDescription @platforms/boards/leon3.repl > + > +path add @/ > + > +showAnalyzer "uartAnalyzer" uart > Antmicro.Renode.Analyzers.LoggingUartAnalyzer > +uartAnalyzer TimestampFormat None > + > +set report_repeating_line """ > +from Antmicro.Renode.Logging import ConsoleBackend > +ConsoleBackend.Instance.ReportRepeatingLines = True > +""" > + > +set add_hook """ > +def my_match(line): > + ok_to_kill_lines = [ > + '*** TEST STATE: USER_INPUT', > + '*** TEST STATE: BENCHMARK', > + '*** END OF TEST ', > + '*** FATAL ***' > + ] > + return any(l in line for l in ok_to_kill_lines) > + > +def my_hook(line): > + print line > + monitor.Parse("q") > + > +Antmicro.Renode.Hooks.UartHooksExtensions.AddLineHook(monitor.Machine["sysbus.uart"], > my_match, my_hook) > +""" > + > +python $add_hook > + > +python $report_repeating_line > + > +macro reset > +""" > + sysbus LoadBinary @leon3-prom.bin 0x0 > + sysbus LoadELF $bin > + > + cpu PC 0 > +""" > + > +runMacro $reset _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
