The log does have the error, and I get it when building by hand too: start.o: in function `.L0 ': /home/alan/rtems/test-build/rtems-tmp/build/riscv/rv32imafdc/../../../bsps/riscv/shared/start/start.S:86:(.bsp_start_text+0x5c): relocation truncated to fit: R_RISCV_GPREL_I against symbol `bsp_section_bss_size' defined in *ABS* section in /home/alan/rtems/test-build/rtems-tmp/build/riscv/rv32imafdc/testsuites/samples/minimum.exe collect2: error: ld returned 1 exit status
On Mon, Oct 17, 2022 at 10:43 PM Chris Johns <chr...@rtems.org> wrote: > > On 18/10/2022 1:13 pm, Joel Sherrill wrote: > > On Sun, Oct 16, 2022 at 9:32 AM Alan Cudmore <alan.cudm...@gmail.com > > <mailto:alan.cudm...@gmail.com>> wrote: > > > > On Fri, Oct 14, 2022 at 9:19 AM Joel Sherrill <j...@rtems.org > > <mailto:j...@rtems.org>> wrote: > > > > > > Pushed. Thanks for pinging. It does help. > > > > > > Since you are looking at the riscv BSPs, could you look at the four > > > BSP build failures reported here: > > > > > > https://lists.rtems.org/pipermail/build/2022-September/036496.html > > <https://lists.rtems.org/pipermail/build/2022-September/036496.html> > > > > > > I think they are all variants so one fix (maybe repeated) should do > > it. > > > The reported message isn't much help: > > > > > > 1 smp riscv/rv32iac build: > > > configure: /home/tester/rtems-cron-6/rtems/waf configure\ > > > --prefix=/home/tester/rtems-cron-6/tools/6/bsps > > --top=/home/tester\ > > > /rtems-cron-6/rtems --rtems-config=config-riscv-rv32iac-smp.ini > > > error: ld/collect2:0 error: no error message found! > > > > > > > I ran the bsp builder on the riscv BSPs with an updated toolchain and > > latest rtems master. I was able to reproduce only one of the failures > > with the rv32imafdc SMP configuration: > > Failures: > > 1 smp riscv/rv32imafdc build: > > configure: /home/alan/rtems/test-build/rtems/waf configure\ > > --prefix=/home/alan/rtems/test-build/bsps\ > > --top=/home/alan/rtems/test-build/rtems > > --rtems-config=config-riscv-\ > > rv32imafdc-smp.ini > > error: ld/collect2:0 error: no error message found! > > > > Average BSP Build Time: 0:00:26.253927 > > Total Time 1:04:45.581263 > > Passes: 147 Failures: 1 > > > > This is the detail from the log: > > [1424/1437] Compiling ../../../rtems/testsuites/samples/nsecs/init.c > > start.o: in function `.L0 ': > > > > /home/alan/rtems/test-build/rtems/build/riscv/rv32imafdc/../../../bsps/riscv/shared/start/start.S:86:(.bsp_start_text+0x5 > > c): relocation truncated to fit: R_RISCV_GPREL_I against symbol > > `bsp_section_bss_size' defined in *ABS* section in /home/ > > > > alan/rtems/test-build/rtems/build/riscv/rv32imafdc/testsuites/samples/minimum.exe > > collect2: error: ld returned 1 exit status > > > > This seems to be similar to the error I get when I try to build the > > frdme310arty BSP with the testsuite and posix enabled: > > [4152/4326] Compiling testsuites/validation/tr-sem-surrender.c > > start.o: in function `.L0 ': > > > > /home/alan/rtems/test-build/rtems-tmp/build/riscv/frdme310arty/../../../bsps/riscv/shared/start/start.S:86:(.bsp_start_te > > xt+0x28): relocation truncated to fit: R_RISCV_GPREL_I against symbol > > `bsp_section_bss_size' defined in *ABS* section in > > > > /home/alan/rtems/test-build/rtems-tmp/build/riscv/frdme310arty/testsuites/validation/ts-validation-io-kernel.exe > > collect2: error: ld returned 1 exit status > > > > I need to investigate this more. > > > > > > There are two issues. > > > > (1) The test in question does not fit on this target and needs to be > > disabled. > > > > (2) Somewhere there is parsing of this output which may be able to be more > > helpful. > > > > Chris... any pointers on (2)? Can the output of bsp builder be improved? > > 1) There should be a log of all the build details. Check in that for the > error. > > 2) Can you build it by hand and see the error? > > Chris _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
