On 10/18/2021 00:44, Chris Johns wrote:
Hi,I cannot run libbsd on real hardware because the cadence rx descriptor cache coherent allocation crashes in `memset`. It is used to clear the memory. The rtemsbsd allocator call optionally clears the memory and it seems the newlib aarch64 memset code crashes when doing this. A basic loop with 8bit or 32bit writes does not crash. The memset call happily clears an array in cached memory with different offsets. I have posted a patch to spcache01 that generates the crash on Versal and ZynqMP hardware. The crash dump is: test cache coherent allocation clear cache coherent with memset: 0x1fe00050 *** FATAL *** fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION) X0 = 0x000000001fe00050 X17 = 0x000000000000000c X1 = 0x0000000000000000 X18 = 0x00000000100007b0 X2 = 0x0000000000000110 X19 = 0x000000001fe00050 X3 = 0x000000001fe000c0 X20 = 0x000000001fdfff80 X4 = 0x000000001fe00250 X21 = 0x0000000010013ab0 X5 = 0x0000000000000004 X22 = 0x0000000000000000 X6 = 0x0000000000000001 X23 = 0x00000000ffffffff X7 = 0x0000000000000000 X24 = 0x0000000010103140 X8 = 0x0000000000000000 X25 = 0x0000000000000000 X9 = 0xffffff80ffffffc8 X26 = 0x0000000000000000 X10 = 0x0000000000000000 X27 = 0x0000000000000000 X11 = 0x000000001010ca78 X28 = 0x0000000000000000 X12 = 0x0000000000000001 FP = 0x000000001010cc30 X13 = 0x000000001fe00050 LR = 0x0000000010001f94 X14 = 0x0000000000000000 SP = 0x000000001010cc30 X15 = 0x0000000000000004 PC = 0x00000000100125c0 X16 = 0x000000001000f700 DAIF = 0x00000000000003c0 VEC = 0x0000000000000004 CPSR = 0x0000000060000005 ESR = EC: 0b100101 IL: 0b1 ISS: 0b0000000000000000001100001 Data Abort taken without a change in Exception level FAR = 0x000000001fe000c0 FPCR = 0x0000000000000000 FPSR = 0x0000000000000010 The Versal (A72) fails in exactly the same way. The allocated address is 0x1fe00050 and the FAR is 0x1fe000c0 so I am not sure if the "0xc0 - 0x50" section is aligning the pointer to a larger word size for better performance and that first part is OK but the different word size breaks.
I'm running with a toolchain that was built with --targetcflags="-DPREFER_SIZE_OVER_SPEED" which affects the content of the memset function, so my memset is just loops of writes and seems to work fine. Just out of curiousity, what instruction was at that PC address? If it was "dc zva", then I had seen this a while back during initial AArch64 bringup and had assumed it was fixed since the addition of the MMU code since that instruction doesn't work on device memory.
It looks like bsp_section_nocacheheap sits inside bsp_section_nocachenoload which is mapped as device memory which wouldn't play nicely with the "dc zva" instruction.
Kinsey _______________________________________________ devel mailing list [email protected] http://lists.rtems.org/mailman/listinfo/devel
