On Mon, Aug 9, 2021 at 9:18 AM Joel Sherrill <j...@rtems.org> wrote: > > On Mon, Aug 9, 2021 at 10:07 AM Gedare Bloom <ged...@rtems.org> wrote: > > > > I have to think about this. The approach taken here just replaces 5.1 > > -> 6, it isn't updating the screengrabs. This means the tutorial isn't > > "real" but that might be fine. > > He can replace the screenshots but that is not worth the trouble at > this point IMO. > > > The other issue is that when we release, then this has to become 6 -> > > 6.1 in the release, and 6 -> 7 in the master. How we manage this > > becomes part of the release overhead. > > As Andrei pointed out, these sections trick you into thinking that > you can ftp "releases" from the master. But they aren't right for the > master if they say 5 or 6. I'm prone to have these type of sections > have prominent warnings that they only apply to releases and not > to fetching from git. At least that keeps the sections and flags them. > I'm ok with that.
> But it doesn't do anything about the burden of the release cycle. > Either we end up with instructions from an older release in a new one, or we need a way to (automate) update for a release. > --joel > > > On Fri, Aug 6, 2021 at 3:27 PM Ray Garza <raymond.ga...@oarcorp.com> wrote: > > > > > > This updates all references and examples in the rtems docs: > > > user/start/rsb-packages.rst to RTEMS 6 > > > > > > --- > > > user/start/rsb-packages.rst | 68 ++++++++++++++++++------------------- > > > 1 file changed, 34 insertions(+), 34 deletions(-) > > > > > > diff --git a/user/start/rsb-packages.rst b/user/start/rsb-packages.rst > > > index 3119318..891ea6a 100644 > > > --- a/user/start/rsb-packages.rst > > > +++ b/user/start/rsb-packages.rst > > > @@ -19,8 +19,8 @@ Return to here once you have completed these steps. > > > > > > You have chosen an installation prefix, the BSP to build, the tool's > > > architecure and prepared the source for the RSB in the previous > > > sections. We > > > -have chosen :file:`$HOME/quick-start/rtems/5` as the installation > > > prefix, the > > > -``erc32`` BSP and the SPARC architecture name of ``sparc-rtems5``, and > > > unpacked > > > +have chosen :file:`$HOME/quick-start/rtems/6` as the installation > > > prefix, the > > > +``erc32`` BSP and the SPARC architecture name of ``sparc-rtems6``, and > > > unpacked > > > the RSB source in :file:`$HOME/quick-start/src`. > > > > > > You are now able to build :ref:`BSP Packages` or 3rd party libraries of > > > code if you > > > @@ -72,36 +72,36 @@ BSP. > > > .. code-block:: none > > > > > > cd $HOME/quick-start/src/rsb/rtems > > > - ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/5 \ > > > + ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/6 \ > > > --with-rtems-tests=yes bsps/erc32 > > > > > > This command should output something like this: > > > > > > .. code-block:: none > > > > > > - RTEMS Source Builder - Set Builder, 5.1.0 > > > + RTEMS Source Builder - Set Builder, 6 (4e6dc6431435) > > > Build Set: bsps/erc32 > > > - Build Set: 5/rtems-sparc.bset > > > - Build Set: 5/rtems-autotools.bset > > > - Build Set: 5/rtems-autotools-internal.bset > > > + Build Set: 6/rtems-sparc.bset > > > + Build Set: 6/rtems-autotools.bset > > > + Build Set: 6/rtems-autotools-internal.bset > > > config: tools/rtems-autoconf-2.69-1.cfg > > > package: autoconf-2.69-x86_64-freebsd12.1-1 > > > building: autoconf-2.69-x86_64-freebsd12.1-1 > > > sizes: autoconf-2.69-x86_64-freebsd12.1-1: 7.505MB (installed: > > > 0.000B) > > > ... > > > - building: protobuf-2.6.1-sparc-rtems5-1 > > > - sizes: protobuf-2.6.1-sparc-rtems5-1: 228.079MB (installed: 84.408MB) > > > - cleaning: protobuf-2.6.1-sparc-rtems5-1 > > > - reporting: net/protobuf-2.6.1-1.cfg -> > > > protobuf-2.6.1-sparc-rtems5-1.txt > > > - reporting: net/protobuf-2.6.1-1.cfg -> > > > protobuf-2.6.1-sparc-rtems5-1.xml > > > - staging: protobuf-2.6.1-sparc-rtems5-1 -> > > > $HOME/quick-start/src/rsb/rtems/build/tmp/sb-500-staging > > > - cleaning: protobuf-2.6.1-sparc-rtems5-1 > > > - Build Set: Time 0:00:23.564992 > > > - Build Set: Time 0:02:27.380299 > > > + building: protobuf-2.6.1-sparc-rtems6 > > > + sizes: protobuf-2.6.1-sparc-rtems6: 228.079MB (installed: 84.408MB) > > > + cleaning: protobuf-2.6.1-sparc-rtems6 > > > + reporting: net/protobuf-2.6.1-1.cfg -> > > > protobuf-2.6.1-sparc-rtems6.txt > > > + reporting: net/protobuf-2.6.1-1.cfg -> > > > protobuf-2.6.1-sparc-rtems6.xml > > > + staging: protobuf-2.6.1-sparc-rtems6 -> > > > $HOME/quick-start/src/rsb/rtems/build/tmp/sb-500-staging > > > + cleaning: protobuf-2.6.1-sparc-rtems6 > > > + Build Set: Time 0:00:27.784056 > > > + Build Set: Time 0:02:32.697406 > > > installing: bsps/erc32 -> $HOME/quick-start/rtems/ > > > clean staging: bsps/erc32 > > > - Staging Size: 1.372GB > > > - Build Set: Time 0:24:17.83979 > > > + Staging Size: 1.401GB > > > + Build Set: Time 0:25:08.37754 > > > > > > The RSB BSP build can be customised with following RSB command line > > > options: > > > > > > @@ -147,10 +147,10 @@ be a list of build sets. To view the avaliable > > > build sets run this command: > > > RTEMS package naming is based on the naming FreeBSD uses in its ports > > > collection. > > > > > > -This Quick Start Guide will build the BSD Library or > > > :file:`5/rtems-libbsd`. > > > +This Quick Start Guide will build the BSD Library or > > > :file:`6/rtems-libbsd`. > > > > > > An RTEMS package is hosted on RTEMS so the tool suite name needs to be > > > supplied > > > -using the ``--host`` option, e.g. ``--host=sparc-rtem5``. The BSP needs > > > to be > > > +using the ``--host`` option, e.g. ``--host=sparc-rtem6``. The BSP needs > > > to be > > > provided using the ``--with-rtems-bsp`` option, > > > e.g. ``--with-rtems-bsp=erc32``. The commands to build ``libbsd`` for the > > > ``erc32`` BSP are: > > > @@ -158,25 +158,25 @@ e.g. ``--with-rtems-bsp=erc32``. The commands to > > > build ``libbsd`` for the > > > .. code-block:: none > > > > > > cd $HOME/quick-start/src/rsb/rtems > > > - ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/5 \ > > > - --host=sparc-rtems5 --with-rtems-bsp=erc32 5/rtems-libbsd > > > + ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/6 \ > > > + --host=sparc-rtems6 --with-rtems-bsp=erc32 6/rtems-libbsd > > > > > > This command should output something like this: > > > > > > .. code-block:: none > > > > > > - RTEMS Source Builder - Set Builder, 5.1.0 > > > - Build Set: 5/rtems-libbsd > > > - config: tools/rtems-libbsd-5.cfg > > > - package: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems5-1 > > > - building: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems5-1 > > > - sizes: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems5-1: > > > 1.199GB (installed: 116.541MB) > > > - cleaning: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems5-1 > > > - reporting: tools/rtems-libbsd-5.cfg -> > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems5-1.txt > > > - reporting: tools/rtems-libbsd-5.cfg -> > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems5-1.xml > > > - installing: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems5-1 -> > > > $HOME/quick-start/rtems/5 > > > - cleaning: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems5-1 > > > - Build Set: Time 0:00:51.898231 > > > + RTEMS Source Builder - Set Builder, 6 (4e6dc6431435) > > > + Build Set: 6/rtems-libbsd > > > + config: tools/rtems-libbsd-6.cfg > > > + package: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems6 > > > + building: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems6 > > > + sizes: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems6: > > > 1.199GB (installed: 116.541MB) > > > + cleaning: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems6 > > > + reporting: tools/rtems-libbsd-6.cfg -> > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems6.txt > > > + reporting: tools/rtems-libbsd-6.cfg -> > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems6.xml > > > + installing: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems6 -> > > > $HOME/quick-start/rtems/6 > > > + cleaning: > > > rtems-libbsd-v3cc039cdac77272a8e16b33ae5a53ccd89edf989-sparc-rtems6 > > > + Build Set: Time 0:00:55.045735 > > > > > > .. note:: > > > > > > -- > > > 2.27.0 > > > > > > _______________________________________________ > > > devel mailing list > > > devel@rtems.org > > > http://lists.rtems.org/mailman/listinfo/devel > > _______________________________________________ > > devel mailing list > > devel@rtems.org > > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
