On 28/03/2021 03:16, Chris Johns wrote:
On 28/3/21 6:16 am, Ahamed Husni wrote:
Hi,
I ran the hello program on the BBB using a bootable SD card. The SD card has two
partitions.
1. BOOT - primary, bootable, FAT32
2. ROOT - primary, ext4
The BOOT partition has the following files.
1. uEnv.txt
2. rtems-app.img
3. Device Tree Blob (am335x-boneblack.dtb)
I want to run all the tests on the BBB. Is there any other way to do this?
You have to get the BBB to fetch exes from a ftftp server (provided inside
rtems-test) and provide some automated power control to the board.
- Dr. Joel (in Discord)
Please have a look at ..
https://docs.rtems.org/branches/master/user/testing/configuration.html
https://docs.rtems.org/branches/master/user/testing/tftp.html
Chris
Like Chris pointed out, the testing documentation is a good start point
if you want to automate running tests.
Beneath using TFTP for the Beagle you could also use a JTAG debugger to
load the application if you have one. As far as I know, the tester is
quite flexible regarding how to load an application.
If your JTAG debugger has an GDB interface, you could use about the
following commands for beagle (you have to adapt "monitor reset" to
whatever causes a reset with your JTAG hardware):
define reset
echo -- Reset target and wait for U-Boot to start kernel.\n
monitor reset
# RTEMS starts at this address.
tbreak *0x80000000
# Linux starts here.
tbreak *0x82000000
continue
echo -- Disable watchdog.\n
set *(uint32_t*)0x44e35048=0xAAAA
while (*(uint32_t*)0x44e35034 != 0)
end
set *(uint32_t*)0x44e35048=0x5555
while (*(uint32_t*)0x44e35034 != 0)
end
echo -- Overwrite kernel with application to debug.\n
load
end
_______________________________________________
devel mailing list
devel@rtems.org
http://lists.rtems.org/mailman/listinfo/devel
