On Thu, Feb 25, 2021 at 11:15 AM junkes <jun...@fhi-berlin.mpg.de> wrote:
> Hallo Joel, > unfortunately, even with waf, it still does not work as it should. > Building and not working is slightly better but still bad. :( The bsp-builder doesn't run any tests. I do run automated test runs on a number of BSPs and have had to login to the server and kill qemu's that get stuck and run forever. I haven't tracked down which BSP is hanging yet though. > Example MVME2500 (qoriq_e500) > > #install rsb and rtems powerpc tools > git clone https://github.com/RTEMS/rtems-source-builder.git rsb > cd rsb/rtems > ../source-builder/sb-set-builder > --prefix=/home/junkes/MVME2500_testing/rtems/6 6/rtems-powerpc > cd ../.. > > #RTEMS development > export RTEMS_VERSION=6 > export RTEMS_ARCH=powerpc-rtems${RTEMS_VERSION} > export RTEMS_ROOT=/home/junkes/MVME2500_testing/rtems/${RTEMS_VERSION} > export PATH=${RTEMS_ROOT}/bin:${PATH} > > # building kernel > git clone git://git.rtems.org/rtems.git kernel > cd kernel > # build and install bsp > ./waf bsp_defaults --rtems-bsps=powerpc/qoriq_e500 > config.ini > sed -i \ > -e "s|RTEMS_POSIX_API = False|RTEMS_POSIX_API = True|" \ > -e "s|CLOCK_DRIVER_USE_FAST_IDLE = True|CLOCK_DRIVER_USE_FAST_IDLE = > False|" \ > -e "s|BUILD_TESTS = False|BUILD_TESTS = True|" \ > config.ini > ./waf configure --prefix=/home/junkes/MVME2500_testing/rtems/6 > ./waf > ./waf install > > #create bootable image file > cd .. > mkimage.py -A ppc -O linux -T kernel -a 0x4000 -e 0x4000 -n RTEMS -d > kernel/build/powerpc/qoriq_e500/testsuites/samples/hello.exe hello.img > > junkes@Krikkit:~/MVME2500_testing$ ls -l hello.img > -rw-rw-r-- 1 junkes junkes 2990848 Feb 25 17:50 hello.img > > #boot file on HW (MVME2500) > > MVME2500=> run rtems_myTests > reading mvme2500.dtb > 12363 bytes read in 12 ms (1005.9 KiB/s) > Speed: 1000, full duplex > Using eTSEC1 device > TFTP from server 141.14.128.9; our IP address is 141.14.128.89 > Filename 'hello.img'. > Load address: 0x10000000 > Loading: ################################################################# > ################################################################# > ################################################################# > ######### > 10.6 MiB/s > done > Bytes transferred = 2990848 (2da300 hex) > WARNING: adjusting available memory to 30000000 > ## Booting kernel from Legacy Image at 10000000 ... > Image Name: RTEMS > Created: 2021-02-25 16:50:29 UTC > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 2990784 Bytes = 2.9 MiB > Load Address: 00004000 > Entry Point: 00004000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 20000000 > Booting using the fdt blob at 0x20000000 > Uncompressing Kernel Image ... Error: Bad gzipped data > GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to > recover > > > U-Boot 2013.01 (Aug 23 2016 - 12:17:55) > > CPU0: P2020E, Version: 2.1, (0x80ea0021) > Core: E500, Version: 5.1, (0x80211051) > Clock Configuration: > CPU0:1200 MHz, CPU1:1200 MHz, > CCB:400 MHz, > DDR:400 MHz (800 MT/s data rate) (Asynchronous), LBC:25 MHz > L1: D-cache 32 kB enabled > ... > > With mkimage no compression: > > mkimage.py -A ppc -O linux -T kernel -C none -a 0x4000 -e 0x4000 -n RTEMS > -d kernel/build/powerpc/qoriq_e500/testsuites/samples/hello.exe hello.img > Image Name: RTEMS > Created: Thu Feb 25 18:10:00 2021 > Image Type: none > Data Size: 2990784 > Load Address: 0x4000 > Entry Point: 0x4000 > > Now the well known behavior -> hangs, must be HW-reset > > MVME2500=> setenv tfile hello > MVME2500=> run rtems_myTests > reading mvme2500.dtb > 12363 bytes read in 13 ms (928.7 KiB/s) > Speed: 1000, full duplex > Using eTSEC1 device > TFTP from server 141.14.128.9; our IP address is 141.14.128.89 > Filename 'hello.img'. > Load address: 0x10000000 > Loading: ################################################################# > ################################################################# > ################################################################# > ######### > 10.3 MiB/s > done > Bytes transferred = 2990848 (2da300 hex) > WARNING: adjusting available memory to 30000000 > ## Booting kernel from Legacy Image at 10000000 ... > Image Name: RTEMS > Created: 2021-02-25 17:10:00 UTC > Image Type: PowerPC Linux Kernel Image (uncompressed) > Data Size: 2990784 Bytes = 2.9 MiB > Load Address: 00004000 > Entry Point: 00004000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 20000000 > Booting using the fdt blob at 0x20000000 > Loading Kernel Image ... OK > OK > Loading Device Tree to 03ff9000, end 03fff04a ... OK > > ---------> no more output ... frozen target .... > > On 2021-02-25 14:45, Joel Sherrill wrote: > > Hi > > Just passing along that the need to switch the BSP builder to waf is > becoming more obvious in the BSP Builder results > > https://lists.rtems.org/pipermail/build/2021-February/026054.html > > 467 of 1615 configurations now fail to build. > > -joel > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel > > >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
