Hi, Chris, Thanks for your reply. I will study it more and see if I can figure it out. thanks.
Regards, Xiaomin On Tue, Dec 22, 2020 at 1:41 PM Chris Johns <chr...@rtems.org> wrote: > Hi Xiaomin, > > Welcome to RTEMS. > > On 16/12/20 6:08 am, Xiaomin (Jasmine) wrote: > > Hi, there, > > > > I followed this article: > > > > https://devel.rtems.org/wiki/Boards/Zynq%20-%20Zedboard > > <https://devel.rtems.org/wiki/Boards/Zynq%20-%20Zedboard> > > > > for development. It basically gets the boot img file from a tftp server. > It > > worked very well for me. > > > > Now I am done with the development. I'd like to boot with my image file > on the > > SD card itself, not getting the img file through tftp anymore. > > > > How should I modify the uenv.txt file to do that? > > I am sorry I do not have the exact command you need, it depends on the > formatting used on the SD card. My approach to solving these types of > problems > is to boot the board and stop the boot early via the keyboard and then > play with > the uboot commands until I find something that works. This typically means > being > able to list the directory of the executable you want to run and then > actually > running it. Once you have those command you can place them in the uenv.txt > config file. > > I hope this helps. > > Chris >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
