[UPDATE]: The error was actually a mismatch of names which was fixed with
the following
changes:
-----------------------------------------------
diff --git a/source-builder/config/epics-7-1.cfg
b/source-builder/config/epics-7-1.cfg
index fe1fb458..ea25f284 100644
--- a/source-builder/config/epics-7-1.cfg
+++ b/source-builder/config/epics-7-1.cfg
@@ -10,7 +10,7 @@
%define epics_version 3afec267ab08568ea454789e562450b00feea5c0
-Name: epics-%{epics_version}-%{_host}-%{release}
+Name: epicsBaseOwnPlayground-%{epics_version}-%{_host}-%{release}
Summary: EPICS v%{epics_version} for target %{_target} on host %{_host}
Version: %{epics_version}
Release: %{release}
@@ -19,7 +19,8 @@ URL: https://epics.mpg.de/
#
# Source
#
-%source set epics --rsb-file=epics-%{epics_version}.zip
https://github.com/hjunkes/epicsBaseOwnPlayground/archive/%{epics_version}.zip
+%source set epics
--rsb-file=epicsBaseOwnPlayground-%{epics_version}.tar.gz
https://github.com/hjunkes/epicsBaseOwnPlayground/archive/%{epics_version}.tar.gz
+
#
# Prepare the source code.
@@ -27,25 +28,20 @@ URL: https://epics.mpg.de/
%prep
build_top=$(pwd)
- source_dir_epics="epics-%{epics_version}"
+ source_dir_epics="epicsBaseOwnPlayground-%{epics_version}"
- %source setup epics -q -n epics-%{epics_version}
+ %source setup epics -q -n epicsBaseOwnPlayground-%{epics_version}
cd ${build_top}
%build
build_top=$(pwd)
-
-
- %{build_directory}
-
- mkdir -p ${build_dir}
- cd ${build_dir}
+ cd ${source_dir_epics}
- %{host_build_flags}
+ %{build_build_flags}
- #cd ${source_dir_epics}
+ %{__make} PREFIX=%{_prefix}
./configure \
--prefix=%{_prefix}
------------------------------
After this, I ran the command
`../source-builder/sb-builder --prefix=/home/mritunjay/development
--log=log_epics epics-7-1 --trace`
again. The error that has come now was expected because the changes I
made in epicsBaseOwnPlayground/configure file
were done manually and here it has to be done through a script. The
changes that I did manually were;
in epics-base/configure/CONFIG_SITE
> set
> CROSS_COMPILER_TARGET_ARCHS=
>
What I entered:
CROSS_COMPILER_TARGET_ARCHS= RTEMS-pc386-qemu
> e.g. RTEMS-pc386
> or RTEMS-xilinx_zynq_a9_qemu
>
> in epics-base/configure/os there must be a file for the target used,
> e.g.
> CONFIG.Common.RTEMS-xilinx_zynq_a9_qemu
> or
> CONFIG.Common.RTEMS-pc386
>
Checked. CONFIG.Common.RTEMS-pc386 was there
>
> Then you have to set in configure/os/CONFIG_SITE.Common.RTEMS
> where to find RTEMS:
>
> # Where to find RTEMS
> #
> # APS:
> #RTEMS_VERSION = 4.10.2
> #RTEMS_BASE = /usr/local/vw/rtems/rtems-$(RTEMS_VERSION)
In my system, I entered this:
#FHI
RTEMS_VERSION = 5
RTEMS_BASE = /home/mritunjay/development/rtems/$(RTEMS_VERSION)
I have a doubt on how to implement the above changes in the
`source-builder/config/epics-7-1.cfg` to make it work.
Do we have to write a patch? And what will be the best way to do it?
The latest error looks somewhat like this which is because I have to
change the configurations in epics directory.
The question is how to accomplish it through the script.
../../configure/os/CONFIG.Common.RTEMS:36:
/Users/junkes/MVME6100/RTEMS/rtems-5/powerpc-rtems5/beatnik/Makefile.inc:
No such file or directory
Thanks
Mritunjay
On Tue, Jul 21, 2020 at 4:09 AM Mritunjay Sharma <
mritunjaysharma...@gmail.com> wrote:
> Hello all,
>
> I went through the
> https://docs.rtems.org/branches/master/user/rsb/index.html
> and started writing a recipe for building EPICS 7.
>
> The code is based on a very raw idea just now and
> so was expected to give errors.
>
> The code can be found here:
> https://github.com/mritunjaysharma394/rtems-source-builder/blob/epics-support/source-builder/config/epics-7-1.cfg
>
> After this, just to check, what errors it might gave,
> I ran the following command:
>
> ../source-builder/sb-builder --prefix=/home/mritunjay/development
> --log=log_epics epics-7-1 --trace
>
> This gave me the following error:
>
> `+ cd epics-3afec267ab08568ea454789e562450b00feea5c0
> /home/mritunjay/development/rtems/src/rsb_GSoC/rtems/build/epics-3afec267ab08568ea454789e562450b00feea5c0-x86_64-linux-gnu-1/do-build:
> 90: cd: can't cd to epics-3afec267ab08568ea454789e562450b00feea5c0
> shell cmd failed: /bin/sh -ex
>
> /home/mritunjay/development/rtems/src/rsb_GSoC/rtems/build/epics-3afec267ab08568ea454789e562450b00feea5c0-x86_64-linux-gnu-1/do-build
> error: building
> epics-3afec267ab08568ea454789e562450b00feea5c0-x86_64-linux-gnu-1`
>
> I think there seems to be some problem with naming the directory.
> I request you all to kindly help with the error as well as please check
> the code
> to see if I am on the right path.
> I am attaching the log and trace file as well.
>
> Thanks,
> Mritunjay
>
>
>
_______________________________________________
devel mailing list
devel@rtems.org
http://lists.rtems.org/mailman/listinfo/devel
