Hi Gedare, Thank you for the quick response, I tried using --target=i386-rtems4.10, which again gave me the same error.
"checking for RTEMS_CPU_MODEL... i386_fp checking for RTEMS_BSP_FAMILY... pc386 checking for CPU_CFLAGS... (cached) -mtune=i386 checking for CFLAGS_OPTIMIZE_V... (cached) -O2 -g checking for style of include used by make... GNU checking for i386-rtems4.10-gcc... no configure: error: no acceptable cc found in $PATH Makefile:712: recipe for target 'pc386' failed make[2]: *** [pc386] Error 1 make[2]: Leaving directory '/home/mritunjay/development/rtems-4.10.2/pc-386/i386-rtems4.10/c' Makefile:257: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/mritunjay/development/rtems-4.10.2/pc-386/i386-rtems4.10/c' Makefile:275: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1" Mritunjay On Wed, Jul 1, 2020 at 3:48 AM Gedare Bloom <[email protected]> wrote: > Use --target=i386-rtems4.10 instead of --target=i386-rtems > > Does this work with 4.10.3/4.10 HEAD? > > On Tue, Jun 30, 2020 at 3:54 PM Mritunjay Sharma > <[email protected]> wrote: > > > > Hello everyone, > > > > I followed the documentation here > https://docs.rtems.org/releases/rtemsdocs-4.10.2/share/rtems/pdf/started.pdf > and > > started building RTEMS (4.10.2) for target architecture: i386 and BSP: > pc386. The configure seemed to be fine > > after entering the following command: > > "../configure --target=i386-rtems --disable-posix --enable-cxx > --enable-rtemsbsp=pc386 --enable-tests=samples > --prefix=/home/development/rtems-4.10.2" > > > > However, the make failed with the following error: checking for > i386-rtems-gcc... no > > "configure: error: no acceptable cc found in $PATH > > Makefile:712: recipe for target 'pc386' failed > > make[2]: *** [pc386] Error 1 > > make[2]: Leaving directory > '/home/mritunjay/development/rtems-4.10.2/pc386/i386-rtems/c' > > Makefile:257: recipe for target 'all-recursive' failed > > make[1]: *** [all-recursive] Error 1 > > make[1]: Leaving directory > '/home/mritunjay/development/rtems-4.10.2/pc386/i386-rtems/c' > > Makefile:275: recipe for target 'all-recursive' failed > > make: *** [all-recursive] Error 1" > > > > I checked that gcc is already installed in /usr/bin/gcc. > > So I am not able to figure out what exactly is causing the error. > > Please help to figure out what is causing this and how it can be > resolved. > > I have attached the config log as well. > > > > Thanks > > Mritunjay > > > > > > > > > > > > > > On Wed, Jul 1, 2020 at 12:27 AM Mritunjay Sharma < > [email protected]> wrote: > >> > >> > >> I mistakenly forgot to cc my other mentors. > >> > >> This is what I responded : > >> > >>> Hello Heinz, > >>> > >>> Pardon the mistake I did in haste, > >>> as I advised by you I am now building it for RTEMS 4.10 and then I will > >>> be reporting here shortly as the build completes. > >>> > >>> Thanks > >>> Mritunjay. > >> > >> > >> I am shortly sending the email for the progress I made after working on > above. > >> Thanks > >> Mritunjay > >> > >> > >> > >> On Wed, Jul 1, 2020 at 12:11 AM Heinz Junkes <[email protected]> > wrote: > >>> > >>> Hello, Mritunjay, > >>> > >>> the epics-base version in github does not work with RTEMS5 It needs my > extensions for this. > >>> Therefore I suggested that you first build epics7 for e.g. RTEMS 4.10. > >>> Then the easiest way is to build epics7 for RTEMS-pc386-qemu. This is > fully supported. > >>> So you learn how to build EPics and then you can develop a first > rsb-set for it. > >>> If this works, we will work on RTEMS5 and xilinx-Zynq. > >>> Heinz > >>> > >>> > On 30. Jun 2020, at 20:10, Mritunjay Sharma < > [email protected]> wrote: > >>> > > >>> > > >>> > Hello everyone, > >>> > > >>> > While yesterday, I completed the blog for the progress > >>> > till date, today I started the coding part. > >>> > > >>> > The tutorial that Heinz sent me yesterday guided > >>> > me to make the following changes: > >>> > > >>> > 1) epics-base/configure/CONFIG_SITE: > >>> > # Which target architectures to cross-compile for. > >>> > # Definitions in configure/os/CONFIG_SITE.<host>.Common > >>> > # may override this setting. > >>> > -CROSS_COMPILER_TARGET_ARCHS= > >>> > - #CROSS_COMPILER_TARGET_ARCHS=vxWorks-ppc32 > >>> > + CROSS_COMPILER_TARGET_ARCHS=pc386 > >>> > +#CROSS_COMPILER_TARGET_ARCHS=RTEMS-xilinx_zynq_a9_qemu > >>> > > >>> > I did not use xilinx_zynq_a9_qemu for now because I could > >>> > not locate CONFIG.Common.RTEMS-xilinx_zynq_a9_qemu > >>> > as of now in epics-base/configure/os. > >>> > > >>> > 2) configure/os/CONFIG_SITE.Common.RTEMS : > >>> > > >>> > # Where to find RTEMS > >>> > # > >>> > # APS: > >>> > -RTEMS_VERSION = 4.10.2 > >>> > -RTEMS_BASE = /usr/local/vw/rtems/rtems-$(RTEMS_VERSION) > >>> > #RTEMS_VERSION = 4.10.2 > >>> > #RTEMS_BASE = /usr/local/vw/rtems/rtems-$(RTEMS_VERSION) > >>> > > >>> > +# FHI: > >>> > +RTEMS_SERIES = 5 > >>> > +RTEMS_VERSION = 5 > >>> > +RTEMS_BASE = /home/mritunjay/development/rtems/5 > >>> > > >>> > I thought to straightaway move with building it with RTEMS 5 > >>> > because I have done it earlier for beatnik. > >>> > > >>> > After this as an experiment, I tried the make command which, > >>> > as expected, generated the following error: > >>> > > >>> > "make[4]: *** No rule to make target '../O.Common/osiFileName.h', > needed by 'inc'. Stop. > >>> > make[4]: Leaving directory > '/home/mritunjay/development/EPICS/epics-base/modules/libcom/src/O.pc386' > >>> > ../../../configure/RULES_ARCHS:58: recipe for target 'install.pc386' > failed > >>> > make[3]: *** [install.pc386] Error 2 > >>> > make[3]: Leaving directory > '/home/mritunjay/development/EPICS/epics-base/modules/libcom/src' > >>> > ../../configure/RULES_DIRS:85: recipe for target 'src.install' failed > >>> > make[2]: *** [src.install] Error 2 > >>> > make[2]: Leaving directory > '/home/mritunjay/development/EPICS/epics-base/modules/libcom' > >>> > ../configure/RULES_DIRS:85: recipe for target 'libcom.install' failed > >>> > make[1]: *** [libcom.install] Error 2 > >>> > make[1]: Leaving directory > '/home/mritunjay/development/EPICS/epics-base/modules' > >>> > configure/RULES_DIRS:85: recipe for target 'modules.install' failed > >>> > make: *** [modules.install] Error 2 > >>> > " > >>> > I then re-visited to what I did with beatnik and made the following > changes to > >>> > start with adding support for RTEMS 5: > >>> > > >>> > diff --git a/configure/CONFIG_COMMON b/configure/CONFIG_COMMON > >>> > index 6c0e11e0d..d56802968 100644 > >>> > --- a/configure/CONFIG_COMMON > >>> > +++ b/configure/CONFIG_COMMON > >>> > @@ -142,9 +142,10 @@ BUILDLIB_SUFFIX = > $(BUILDLIB_SUFFIX_$(SHARED_LIBRARIES)) > >>> > #-------------------------------------------------- > >>> > # vpath directories > >>> > POSIX_YES = os/posix > >>> > +OS_IMPL_DIRS = $(if $(OS_API),os/$(OS_CLASS)-$(OS_API),) > os/$(OS_CLASS) > >>> > GENERIC_SRC_DIRS = .. $(SRC_DIRS) > >>> > OS_SRC_DIRS += . $(foreach dir, .. $(SRC_DIRS), \ > >>> > - $(addprefix $(dir)/, os/$(OS_CLASS) $(POSIX_$(POSIX)) > os/default )) > >>> > + $(addprefix $(dir)/, $(OS_IMPL_DIRS) $(POSIX_$(POSIX)) > os/default )) > >>> > CMPLR_SRC_DIRS += . $(foreach dir, .. $(SRC_DIRS), \ > >>> > $(addprefix $(dir)/, compiler/$(CMPLR_CLASS) > compiler/default )) > >>> > ALL_SRC_DIRS = $(CMPLR_SRC_DIRS) $(OS_SRC_DIRS) $(GENERIC_SRC_DIRS) > >>> > diff --git a/configure/CONFIG_SITE b/configure/CONFIG_SITE > >>> > index 09b4c1525..f3aa4b3f7 100644 > >>> > --- a/configure/CONFIG_SITE > >>> > +++ b/configure/CONFIG_SITE > >>> > @@ -161,7 +161,7 @@ USE_POSIX_THREAD_PRIORITY_SCHEDULING = YES > >>> > > >>> > # Site version number, if set will append '-' and this string to the > >>> > # EPICS version number string that is reported by many tools. > >>> > -EPICS_SITE_VERSION = > >>> > +EPICS_SITE_VERSION = > >>> > > >>> > # For GNU compiler, use pipes rather than temporary files for > >>> > # communication between the various stages of compilation. > >>> > diff --git a/configure/os/CONFIG.Common.RTEMS > b/configure/os/CONFIG.Common.RTEMS > >>> > index 8425e6ef9..929510d61 100644 > >>> > --- a/configure/os/CONFIG.Common.RTEMS > >>> > +++ b/configure/os/CONFIG.Common.RTEMS > >>> > @@ -94,16 +94,28 @@ MODEXT=.obj > >>> > # operating system class (include/os/<os_class>) > >>> > OS_CLASS = RTEMS > >>> > > >>> > +#-------------------------------------------------- > >>> > +# operating system API (src/os/<os_class>-<os-api>) > >>> > +OS_API_4.7 = kernel > >>> > +OS_API_4.8 = kernel > >>> > +OS_API_4.9 = kernel > >>> > +OS_API_4.10 = kernel > >>> > +OS_API = $(firstword $(OS_API_$(RTEMS_SERIES)) posix) > >>> > + > >>> > #-------------------------------------------------- > >>> > # Operating system flags > >>> > -OP_SYS_LDLIBS += -lrtemsCom -lc -lrtemscpu -lCom -lnfs -lm > >>> > -OP_SYS_LDFLAGS += $(CPU_CFLAGS) -u Init \ > >>> > +OP_SYS_LDLIBS += -lrtemsCom -lc -lrtemscpu -lCom -lnfs -lm > >>> > +# newest Rtems > 2019 needs this -ltftpfs > >>> > + > >>> > +OP_SYS_LDFLAGS_posix += -u POSIX_Init > >>> > +OP_SYS_LDFLAGS_kernel += $(CPU_CFLAGS) -u Init \ > >>> > $(PROJECT_RELEASE)/lib/no-dpmem.rel \ > >>> > $(PROJECT_RELEASE)/lib/no-mp.rel \ > >>> > $(PROJECT_RELEASE)/lib/no-part.rel \ > >>> > $(PROJECT_RELEASE)/lib/no-signal.rel \ > >>> > $(PROJECT_RELEASE)/lib/no-rtmon.rel > >>> > > >>> > +OP_SYS_LDFLAGS += $(CPU_FLAGS) $(OP_SYS_LDFLAGS_$(OS_API)) > >>> > MOD_SYS_LDFLAGS += $(CPU_CFLAGS) -Wl,-r -nostdlib > >>> > > >>> > # Do not link against libraries which are part of the Generic Image > >>> > diff --git a/modules/libcom/RTEMS/Makefile > b/modules/libcom/RTEMS/Makefile > >>> > index b46889db1..cb1a63b97 100644 > >>> > --- a/modules/libcom/RTEMS/Makefile > >>> > +++ b/modules/libcom/RTEMS/Makefile > >>> > @@ -11,6 +11,9 @@ TOP = ../../.. > >>> > include $(TOP)/configure/CONFIG > >>> > include $(TOP)/configure/CONFIG_LIBCOM_VERSION > >>> > > >>> > +#for checking > >>> > +SRC_DIRS += ../$(OS_API) > >>> > + > >>> > PERL_SCRIPTS += epicsMakeMemFs.pl > >>> > > >>> > INC += epicsRtemsInitHooks.h > >>> > (END) > >>> > > >>> > I will start with further changes tomorrow. Please find the changes > pushed > >>> > here: > https://github.com/epics-base/epics-base/compare/7.0...mritunjaysharma394:GSoC_pc-386 > >>> > > >>> > I will be pleased to have the feedback and if I am on the correct > course now. > >>> > > >>> > I will also like to inform that I have filled the GSoC Phase 1 > Evaluation form and I > >>> > will request all my mentors to please feel free to fill the form > before the deadline > >>> > and I hope that from now I will not disappoint with my progress. > >>> > > >>> > It is my bad that I still have not been able to reach out to one > more > >>> > mentor Pavel Pisa. Please if possible share the email id of Pavel > and cc > >>> > Pavel in the replies to the email so that Pavel s aware of the > progress and I > >>> > can apologise for my inability to connect with Pavel earlier. > >>> > > >>> > Thanks, > >>> > Mritunjay. > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> >
_______________________________________________ devel mailing list [email protected] http://lists.rtems.org/mailman/listinfo/devel
