OK thanks. My preference is to sit on these 2 patches until after we release rtems5.
On Thu, Apr 23, 2020 at 11:21 PM Eshan Dhawan <eshandhawa...@gmail.com> wrote: > > For testing, I followed the instruction in the blog written by @Vaibhav Gupta > last year for applying a patch to newlib > (the blog can be read here: > https://medium.com/my-gsoc-2019-journey/apply-newlib-patch-to-rtems-source-builder-6873b0fb31b8 > ) > After building the toolchain again, aio.h was present in the include > directory of the toolchain (sparc-rtems5) > then I build sparc/erc32 BSP with the new toolchain and the other patch ( > patch to remove aio.h from rtems ) > and ran the aio tests present in testsuite/psxtests. > I also did the same for riscv/rv32imac. > > -Eshan > > On Fri, Apr 24, 2020 at 8:29 AM Gedare Bloom <ged...@rtems.org> wrote: >> >> Hi Eshan, >> >> How did you test it? >> >> On Thu, Apr 23, 2020 at 12:58 PM Eshan Dhawan <eshandhawa...@gmail.com> >> wrote: >> > >> > hello, >> > This patch adds aio.h to newlib. >> > If it is ok should I send it to newlib mailing list?? >> > thanks >> > -Eshan >> > >> > >> > On Fri, Apr 24, 2020 at 12:04 AM Eshan dhawan <eshandhawa...@gmail.com> >> > wrote: >> >> >> >> Added aio.h in newlib/libc/include >> >> >> >> the file is taken from RTEMS (rtems/cpukit/include) >> >> >> >> Build successful for sparc-rtems5 and tested it RTEMS Source Builder (rsb) >> >> >> >> Eshan dhawan (1): >> >> Adding aio.h to newlib/libc/include from RTEMS >> >> >> >> newlib/libc/include/aio.h | 193 ++++++++++++++++++++++++++++++++++++++ >> >> 1 file changed, 193 insertions(+) >> >> create mode 100644 newlib/libc/include/aio.h >> >> >> >> -- >> >> 2.17.1 >> >> _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
