On 2020-02-08 09:31 +1100, Chris Johns wrote: > > https://ftp.rtems.org/pub/rtems/people/amar/test1.jpg > > > > That is flash. :)
Heh thanks, I set this up in August 2019 and it's been nagging at me since. > You are not alone getting to this point. I know OAR has been setting > something up. That's good, this setup is dedicated for Buildbot or at least that is my plan for it. > I am happy to help. Would you like to work through this together on the > user list as a public example of how to get a set up like this working. > There is nothing around to explain what is needed and how to do this and > maybe having to explain it in emails will give me a base on how to > document it. It would help me figure out how best to do this. Yeah, we could do that. I did read through the docs you pointed me to back in August. I've been slowly working on this for years I do have much of the background work already complete it's a matter of getting the commands all listed out in order for Buildbot to run. I was going to start with the Beaglebone and do TFTP to load the tests. I do have a board design using p-channel mosfets to be able to disconnect the power to each board out of band to handle hard locks. That's why I went with a custom power supply. Wish I had the 5-10k for the digital switchable power supplies I'm used to using. :) Amar. _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
